Saturday, July 2, 2011

Flux cored arc welding wire E71T-1

Flux cored Welding wire (ET71-1):
1.all position capability
2.good slag removable
3.Dia :1.2mm,1.4mm,1.6mm
4.packing:15Kg
FLUX Arc Welding wire (E71T-1):

E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength is required. It is an excellent general purpose welding wire. A shielding gas must be used with this wire.
Typical Applications
General-purpose flux cored welding of steel
Structural steel
Farm machinery
Construction equipment
General carbon steel fabrication
AWS Specification

AWS A5.20
AWS Classification

E71T-1
Welding Current
DCEP (Electrode Positive, Reverse Polarity)
Typical Wire Chemistry
C 0.05
Si 0.74
Mn 1.00
P 0.008
S 0.015
Typical Mechanical Properties (As Welded)
Yield Strength, psi 71,000
Tensile Strength, psi 82,800
% Elongation in 2" 25
Welding Positions
All positions
Shielding Gas

100% CO
2
or 75% Ar / 25% CO
2
mix
Available Diameters
.035”, .045”, .052”, & 1/16”
Operating Range In Amps
.030” 40 –100
.035” 100 – 130
.052” 140 – 180
1/16” 175 – 300

No comments:

Post a Comment