Saturday, January 29, 2011

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.32%,Si 0.40%,Mn 2.0-3.0%,Cr 4.0-7.0%,Mo:0.50-1.00%,HRC48-54

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect.
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter

Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type

200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD410M
Standard
0.3~0.5
3.5~5.5
≤1
≤1
As welded
After impact
Test
0.45
4.0
0.62
0.40
≥50
≥55

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.10%,Si 0.30%,Mn 0.70%,Cr 13%,Mo:0.50%,HRC38-45.

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
flux cored wire for submerged arc hardfacing
used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter

Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type

200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD450M
Standard
0.3~0.5
3.5~5.5
≤1
≤1
As welded
After impact
Test
0.45
4.0
0.62
0.40
≥50
≥55

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter
Size
(mm)
Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type
Φ1.6
200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD40M
Standard
0.3~0.5
5.5~7.0
≤1
≤1
As welded
After impact
Test
0.45
6.0
0.62
0.90
≥50
≥58

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect....
flux cored wire for submerged arc hardfacing used for hardfacing
continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.

Standard
Enterprise Standard

Introduction
This is a titania calcium CO2 gas-shielded flux
cored wire, performance welding process, small spatter,
stable arc, slag off easy, beautiful weld shape.

Application
It is applied to repair surface of high impact wear parts, such as shiled machine,
excavator bucket and hopper of mining machinery products.

Welding Parameter
Size
(mm)
Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type
Φ1.6
200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD530M
Standard
0.1~0.3
6~7
≤1
≤1
As welded
After impact
Test
0.35
6.2
0.62
0.94
≥50
≥55

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
YC-YD55M
flux cored wire for submerged arc hardfacing
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.05%,Si 0.60%,Mn 1.50%,Cr 1.5-3.0,Mo:0.92%,HRC 54-58

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect.
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter
Size
(mm)
Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type
Φ1.6
200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD40M
Standard
0.1~0.3
3.0~6.0
≤1
≤1
As welded
After impact
Test
0.25
3.5
0.62
0.30
≥48
≥55

flux cored wire for submerged arc hard facing

flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety v
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.05%,Si 0.60%,Mn 1.50%,Cr 1.5-3.0,Mo:0.92%,HB 220-260

Argon arc Welding Wire

We gained good reputation for our low price but high quality among our customers. So we hope we can have business relations with
Argon Arc Welding Wire


(1) 0.8mm, 1.0mm, 1.2mm, 1.6mm
(2) low price and high quality
(3) Certificate: ISO9001:2000.

(4)Chemical contents:

C
Si
Mn
P
S
Cr
Mo
V
Cu
Ni
0.07
0.85-0.90
1.45-1.50
0.14-0.20
0.01-0.02
0.04
0.01-0.02
0.008-0.010
0.02
0.030


(5) Mechnical Proprties of deposited metal:
Rel or Rp0.2
( Mpa)
Rm
A(%)
Z(%)

370-375
535-545
27.5-28.5



flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.04%,Si 0.04%,Mn 0.04%,Cr 15.5%,Mo:0.50%,Ni:5.50%,HRC38

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect.
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter

Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type

200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD40M
Standard
0.3~0.5
3.5~5.5
≤1
≤1
As welded
After impact
Test
0.45
4.0
0.62
0.40
≥50
≥58

flux cored wire for submerged arc hard facing

flux cored wire for submerged arc hardfacing
used for hardfacing continuous casting roll,
steam valve,wedge-shaped valve,safe
YC-YD430M flux cored wire for submerged arc hard facing
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.05%,Si 0.60%,Mn 1.50%,Cr 1.5-3.0,Mo:0.92%,HRC 40-46.

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing
used for hardfacing continuous casting roll,
steam valve,wedge-shaped valve,
safety valve..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.25%,Si 0.40%,Mn 1.50%,Cr 1.65%,Mo:0.50%,HB350

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Standard:Enterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter

Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type

200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD550M
Standard
0.3~0.5
3.5~5.5
≤1
≤1
As welded
After impact
Test
0.45
4.0
0.62
0.40
≥50
≥55

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing
used for hardfacing continuous casting roll,
steam valve,wedge-shaped valve,
safety valve..
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.12%,Si 0.50%,Mn 1.10%,Cr 11.70%,Mo:0.70%,Ni:1.10%,HRC38-47

flux cored wire for submerged arc hard facing

fcw for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve ect.
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
StandardEnterprise Standard
IntroductionThis is a titania calcium CO2 gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape.
ApplicationIt is applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products.
Welding Parameter
Size
(mm)
Current
(A)
Voltage
(V)
CO2 Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type
Φ1.6
200~280
22~28
15~20
15~20
34~36
80°
DCEP
Chemical Composition and Mechanical Properties
Grade
Item
C
Cr
Mo
Si
HRC
YC-YD50M
Standard
0.1~0.3
6~7
≤1
≤1
As welded
After impact
Test
0.22
6.2
0.62
0.94
≥48
≥55

flux cored wire for submerged arc hardfacing

flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety v
flux cored wire for submerged arc hardfacing used for hardfacing continuous casting roll,steam valve,wedge-shaped valve,safety valve and so on.
Chemical composition:C 0.05%,Si 0.60%,Mn 1.50%,Cr 1.5-3.0,Mo:0.92%,HB 220-260

flux cored wire forming machine

20 station all rolling type flux cored wire production line is our company' s newest generation high-tech product.
20 station all rolling type flux cored wire production line is our company’s newest generation high-tech product, on account of south America market’s special requirement. Now we have exported it to Brazil successfully. It is product by our company’s strong technology team cooperating with top university’s team.

All rolling type active forming machine (XZ-CX-20)
(
20 station
)
(including 40 horizontal rollers)


Main technical parameters
1.steel strip width: 14mm
2.steel strip thickness: 0.4mm
3.Output diameter of wire forming machine:
Φ
2.85mm
4.Finished wire specification: Φ2.4mm (finished flux-cored wire)
5.Wire section shape: Overlapping interface
6.steel strip input speed: Vmax ≤65m/min
7.Feeding rate: 12~50%
8.High precision powder feeding system, automatic detection and powder feeding precision relative error ≤±2.9%
9.Motor power:3KW ×20 = 60KW
10Take-up and pay-off bobbin size: 800×350×480mm (accord to the buyer demand)

Machine type: 3 sets pre-forming,17sets forming and reducing the diameter rollers,20 sets horizontal location and assisted reducing diameter adjusting rollers. Total 40 rollers forming and reducing diameter, and have the variable frequency motor. Electrical control is siemens PRC, the diameter of the roller is 148mm.

flux cored wire manufacturer

flux cored wire(manufactory)
1.type:AWS E71T-1
2.dia:0.8mm,1.0mm,1.2mm,1.6mm.
3.ISO9001:2008
Flux Cored Wire
Description:
AWS E71T-1 is the use of tianium-based flus-cored wire welding.Deposited efficient performance of all-position welding process better,legislation can also be welded down.
Application:

The product is widely used in structures fabring by mild steel and 550 Mpa grade high tensile steel welding class,, such as ships, pressure vessels, machine equipment,steel bridges ect.
Conform with:
GB/T 10045 E501T-1
AWS A5.20 E71T-1
EN 17632 T422PC1H10
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D200mm
D270mm D300mm K300mm
5kg,15kg,20kg

chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni

≤0.18
≤1.75
≤0.90
≤0.03
≤0.0
-
-

Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥400
≥480
≥22
≥27(-20)

Argon arc Welding Wire

We gained good reputation for our low price but high quality among our customers. So we hope we can have business relations with
Argon Arc Welding Wire


1. Diameter: 0.8mm, 1.0mm, 1.2mm, 1.6mm
2. Used in welding manufacturing of steel structure products.

The content is as follows:

C
Si
Mn
P
S
Cr
Mo
V
Cu
Ni
0.07
0.85-0.90
1.45-1.50
0.14-0.20
0.01-0.02
0.04
0.01-0.02
0.008-0.010
0.02
0.030


Mechnical Proprties of deposited metal:
Rel or Rp0.2
( Mpa)
Rm
A(%)
Z(%)

370-375
535-545
27.5-28.5

flux cored wire used for the valve gate seal

stainless welding wire
Flux cored wire
marstensitic stainless hardfacing wire
hardness:HRC 39
used for the valve seat seal
valve gate seal
RD-YD507Mo(Q)
Flux cored wire
marstensitic stainless hardfacing wire
hardness:HRC 39
used for the valve seat seal
Flux cored wire, 13%Cr type marstensitic stainless hardfacing of continous casting roll ,valve seat and others with excellent corrsion abrasion and heat resistance.

flux cored wire

The products can be widely used for civil and naval ships, bridges, vehicles, oil/ gas pipes and other national key projects
The products can be widely used for civil and naval ships, bridges, vehicles, oil/ gas pipes and other national key projects

flux cored wire

Its characteristic is High tenacity low hydrogen.

Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
1.2MM
3) Standards:
a) GB/T10045-2001
b) E500T-5
c) AWS A5.20 E70-1
d) YFW C50DR
e) YC-YJ507MX(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton outside.
5) AWS A5.20E70T-1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency,good welding technical performance in all-position welding,apply for low carbon steel and 500MPA grade strength steel welding,such as ships,pressure vessels,mechanical equipments and bridges.
6)Chemical composition of deposited metal(%)
C:0.04,Mn:1.49,Si:0.35,S :0.008,P:0.011
7)Mechanical Properties of Deposited Metal:
Yield Point:480MPA, TensileStrength:560MPA,Elongation:28%
8)Shielding Gas:CO2

flux cored wire

All kind of welding comsumables,Good quality and good price

Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
f) steel sturcture

flux cored wire

AWS E308LT1-1 IS USED FOR WELDING
304L stainless steel
AWS E308LT1-1 are widely applied to different fields,such as shipbuilding,machinery,chemical industry,pressure vessels,bridges and building,the leading products have been awarded the title of the provincial and ministerial high quality products,the quality of our products has reached the international level.
2)This product is used for welding 304stainless steel
3)Standards:
a) AWS E308LT1-1
b) GB E308LT1-1
C) YC-YA308L(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton

5)
Chemical composition of deposited metal(%)
C:0.028,Mn:1.38,Si:0.38,S :0.011,P:0.012
6)Mechanical Properties of Deposited Metal:
TensileStrength:570MPA,Elongation:40%
7)Shielding Gas:CO2
8)Polarity:DC(+)


flux cored wire

AWS E308LT1-1 IS USED FOR WELDING 304L stainless steel.
AWS E308LT1-1 are widely applied to different fields,such as shipbuilding,machinery,chemical industry,pressure vessels,bridges and building,the leading products have been awarded the title of the provincial and ministerial high quality products,the quality of our products has reached the international level.
2)This product is used for welding 304stainless steel
3)Standards:
a) AWS E308LT1-1
b) GB E308LT1-1
C) YC-YA308L(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton

5)
Chemical composition of deposited metal(%)
C:0.028,Mn:1.38,Si:0.38,S :0.011,P:0.012
6)Mechanical Properties of Deposited Metal:
TensileStrength:570MPA,Elongation:40%
7)Shielding Gas:CO2
8)Polarity:DC(+)


Friday, January 28, 2011

flux cored wire

flux cored wire(manufactory)
1.type:AWS E71T-1
2.dia:0.8mm,1.0mm,1.2mm,1.6mm.
3.ISO9001:2008
Flux Cored Wire
Description:
AWS E71T-1 is the use of tianium-based flus-cored wire welding.Deposited efficient performance of all-position welding process better,legislation can also be welded down.
Application:

The product is widely used in structures fabring by mild steel and 550 Mpa grade high tensile steel welding class,, such as ships, pressure vessels, machine equipment,steel bridges ect.
Conform with:
GB/T 10045 E501T-1
AWS A5.20 E71T-1
EN 17632 T422PC1H10
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D200mm
D270mm D300mm K300mm
5kg,15kg,20kg

chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni

≤0.18
≤1.75
≤0.90
≤0.03
≤0.0
-
-

Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥400
≥480
≥22
≥27(-20)

flux cored wire

Its characteristic is High tenacity low hydrogen.

Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
1.6MM
3) Standards:
a) GB/T10045-2001
b) E500T-1
c) AWS A5.20 E70-1
d) YFW C50DR
e) YC-YJ50MX(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton outside.
5) AWS A5.20E70T-1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency,good welding technical performance in all-position welding,apply for low carbon steel and 500MPA grade strength steel welding,such as ships,pressure vessels,mechanical equipments and bridges.
6)Chemical composition of deposited metal(%)
C:0.04,Mn:1.49,Si:0.35,S :0.011,P:0.012
7)Mechanical Properties of Deposited Metal:
Yield Point:480MPA, TensileStrength:560MPA,Elongation:27%
8)Shielding Gas:CO2

flux cored wire

1. flux cored wire,normally used for shipbuilding, marine structures, steel structures, bridges, chemical welding.wire
1, flux cored wire, low-alloy steel and high strength steel 490Mpa level, normally used for shipbuilding, marine structures, steel structures, bridges, chemical welding equipment, etc.
2,
Packaging
Wire Size
Spool Size
Net Weight
Φ1.0~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg

chemical composition of welding wire(%)
C
Mn
Si
P
S
≤0.10
≤1.75
≤0.75
≤0.03
≤0.03
Mechanical Properties or Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%
AKV impact(J)
≥400
≥480
≥22
≥47(0°C)

Wire Size(mm)
φ1.2
φ1.4
φ1.6
Welding position

Welding current(A)
120~300
160~400
190~450
Please be noted:
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.Before welding please clean out the oil,rust,water etc from the work parts
3.The protection of the use of CO2 gas, CO2 gas purity of 99.98%.
4.CO2 welding to protect the flow of gas should be controlled in 20-25L/min.
5.Extend the length of the wire should be controlled in the range of 15-25mm.
6.Preheating before welding to 150-300 °C, PWHT 700-740 °C tempered by the need to deal with.

flux cored wire

flux cored wire for copper to aluminum brazing
We manufacture the flux cored wire for the copper to aluminum brazing, it is our self made product that allows for low temperature brazing (400 -480 centigrade), and even allows for joining of different metal such as Al and Cu, Al and SUS.

flux cored wire

Its characteristic is High tenacity low hydrogen

Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
2.4MM
3) Standards:
a) GB/T10045-2001
b) E501T-1
c) AWS A5.20 E71T-1
d) YFW C50DR
e) YC-YJ502(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton outside.

5) AWS A5.20E71T-1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency,good welding technical performance in all-position welding,apply for low carbon steel and 500MPA grade strength steel welding,such as ships,pressure vessels,mechanical equipments and bridges.

6)Chemical composition of deposited metal(%)
C:0.07,Mn:1.46,Si:0.39,S :0.012,P:0.014,Ni:0.86,Mo:0.16

7)Mechanical Properties of Deposited Metal:
Yield Point:540MPA, TensileStrength:620MPA,Elongation:26%

8)Shielding Gas:CO2

flux cored wire

welding wire HAVE BEEN APPROVED BY CCS,ABS,DNV,LR,GL,BV,NK,KR,RINA
FOR 3Y
Welding wire HAVE BEEN APPROVED BY CCS,ABS,DNV,LR,GL,BV,NK,KR,RINA FOR 3Y

Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
a) 1.0mm
b) 1.2mm
c) 1.4mm
d) 1.6mm
3) Standards:
a) GB/T10045-2001
b) E501T-1
c) AWS A5.20 E71T-1
d) YFW C50DR
e) YC-YJ502(Q)
Packing:
One spool is vacuum packed by aluminum film and then one carton outside.



flux cored wire

AWS E308LT1-1 IS USED FOR WELDING 304L stainless steel
AWS E308LT1-1 are widely applied to different fields,such as shipbuilding,machinery,chemical industry,pressure vessels,bridges and building,the leading products have been awarded the title of the provincial and ministerial high quality products,the quality of our products has reached the international level.
2)This product is used for welding 304stainless steel
3)Standards:
a) AWS E308LT1-1
b) GB E308LT1-1
C) YC-YA308L(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton

5)
Chemical composition of deposited metal(%)
C:0.028,Mn:1.38,Si:0.38,S :0.011,P:0.012
6)Mechanical Properties of Deposited Metal:
TensileStrength:570MPA,Elongation:40%
7)Shielding Gas:CO2
8)Polarity:DC(+)


flux cored wire

Flux cored wire E71T-1 are also our main one And our product has passed the cirtificate of ABS, CCS, GL, LR, SGS, DNN.
Flux cored wire E71T-1 are also our main one And our product has passed the cirtificate of ABS, CCS, GL, LR, SGS, DNN.

Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
a) 1.0mm
b) 1.2mm
c) 1.4mm
d) 1.6mm
3) Standards:
a) GB/T10045-2001
b) E501T-1
c) AWS A5.20 E71T-1
d) JIS Z3313
e) YFW C50DR
Packing:
One spool is vacuum packed by aluminum film and then one carton outside.
Cirtificate: ABS, CCS, LR, GL, DNV, KR, NK, BV, RINA

flux cored wire

Our flux cored wire is suitable for welding of ships, machinery, steel structure, bridge, etc.

Rutile style wire has excellent operating performance and mechanical properties for all-position welding. We have successfully developed a producing line for F.C.W with 3,000 tons of production capacity.
The wire can be extracted under the pail packing static condition and doesnt distort. When welding, the wire aligns correctly and does not have snake-shaped weld bead phenomenon.
Our products win certificates of ship building classes of 9 countries.
We can provide u with much higher quality and more competitive price.
Diameters are 1.2mm and 1.6mm.
Weight: 15kgs/pc

flux cored wire

WE CERTIFICATE BY: CCS,ABS,DNV,LR,GL,BV,NK,KR,RINA.
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
a) 1.0mm
b) 1.2mm
c) 1.4mm
d) 1.6mm
3) Standards:
a) GB/T10045-2001
b) E501T-1
c) AWS A5.20 E71T-1
d) JIS Z3313
e) YFW C50DROuter packing:Carton

flux cored wire

Its characteristic is High tenacity low hydrogen.
Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
1.6MM
3) Standards:
a) GB/T10045-2001
b) E500T-5
c) AWS A5.20 E70T-5
d)YC-YJ507(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton outside.
5) AWS A5.20E70T-1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency,good welding technical performance in all-position welding,apply for low carbon steel and 500MPA grade strength steel welding,such as ships,pressure vessels,mechanical equipments and bridges.
6)Chemical composition of deposited metal(%)
C:0.05,Mn:1.29,Si:0.32,S :0.008,P:0.011
7)Mechanical Properties of Deposited Metal:
Yield Point:490MPA, TensileStrength:560MPA,Elongation:28%
8)Shielding Gas:CO2OR 80%Ar+20%CO2

flux cored wire

Its characteristic is High tenacity low hydrogen ,and approved by ABS,DNV,CCS,GL,NK,BV,LR,RINA,KR.

Flux Cored Wire
Features:
1) Suitable for use in such industries as:
a) Metallurgical industry
b) Bridge building
c) Building industry
d) Chemical industry
e) Shipping industry
2) Diameters:
0.9mm
3) Standards:
a) GB/T10045-2001
b) E500T-1
c) AWS A5.20 E70-1
d) YFW C50DR
e) YC-YJ50MX(Q)
4)Packing:
One spool is vacuum packed by aluminum film and then one carton outside.
5) AWS A5.20E70T-1 is a kind of TI type flux cored wire for CO2 welding ,it has high cladding efficiency,good welding technical performance in all-position welding,apply for low carbon steel and 500MPA grade strength steel welding,such as ships,pressure vessels,mechanical equipments and bridges.
6)Chemical composition of deposited metal(%)
C:0.04,Mn:1.49,Si:0.35,S :0.011,P:0.012
7)Mechanical Properties of Deposited Metal:
Yield Point:480MPA, TensileStrength:560MPA,Elongation:27%
8)Shielding Gas:CO2

flux cored wire

Our company has passed the ISO9001 (2000) quality system approval and many products have got approval by CCS, LR, GL, BV, DNV

GB
AWS A5.4
Shield Gas
Application
E501T-1
A.5.20 E71T-1
CO
2
Welding of carbon steels and 500N/mm
2
high tensile steels.
E501T-1
A.5.20 E71T-5
CO
2
Welding of important carbon steels and 500N/mm
2
high tensile steels.
E551T5-K1
A.5.29 E81T1-Ni1
CO
2
Welding of important low alloy steel structures of 600 N/mm
2
E551T1-W
A.5.29 E71T-1W
CO
2
Welding of weatherproof steels and having resistance to corrosion of seawater.
E551T1-B2
A.5.29 E80T5-B2
CO
2
Welding of partite heat-resisting steels working below 520, such as 15CrMo.
E308T-1
A.5.22 E308T-1
CO
2
Welding of similar type stainless steels, such as 304 steel.
E347T-1
A.5.22 E347T-1
CO
2
Welding of similar type stainless, such as 18Cr-8Ti steel.

flux cored wire

flux cored wire
E501T-1
E500T-5

flux cored wires for welding

flux cored wire(manufactory)
1.type:AWS E71T-1
2.dia:0.8mm,1.0mm,1.2mm,1.6mm.
3.ISO9001:2008
Flux Cored Wire
Description:
AWS E71T-1 is the use of tianium-based flus-cored wire welding.Deposited efficient performance of all-position welding process better,legislation can also be welded down.
Application:

The product is widely used in structures fabring by mild steel and 550 Mpa grade high tensile steel welding class,, such as ships, pressure vessels, machine equipment,steel bridges ect.
Conform with:
GB/T 10045 E501T-1
AWS A5.20 E71T-1
EN 17632 T422PC1H10
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D200mm
D270mm D300mm K300mm
5kg,15kg,20kg

chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni

≤0.18
≤1.75
≤0.90
≤0.03
≤0.0
-
-

Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥400
≥480
≥22
≥27(-20)

flux cored wires

The flux cored wires have the advantages of high production efficiency ,little spatter,beautiful welding bead appearance,high vo
E71T-1.E71T-5.E70-9

flux welding wire E71T-1

flux welding wire AWS E71T-1 GB E501T-1
1.Certificate:ISO 9001:2000
2.Used for high effciency welding in all position
flux cord wire E71T-1

is a self-shielding flux cored wire used for welding carbon steels. This product does not require a shielding gas and can be used in limited multi-pass welding operations. The bead appearance is not equal to a gas-shielded product, but the benefits of not having to use gas makes this product popular. E71T-11 operates on straight polarity only (DCEN).
Typical Applications

Butt, lap and fillet welds on steel 16 gauge through ½”
Assembly and maintenance welding
Welding Current

DCEN (Electrode Negative, Straight Polarity)

flux welding wire E71T-1

flux welding wire AWS E71T-1 GB E501T-1
1.Certificate:ISO 9001:2000
2.Used for high effciency welding in all position
flux cord wire E71T-1

is a self-shielding flux cored wire used for welding carbon steels. This product does not require a shielding gas and can be used in limited multi-pass welding operations. The bead appearance is not equal to a gas-shielded product, but the benefits of not having to use gas makes this product popular. E71T-11 operates on straight polarity only (DCEN).
Typical Applications

Butt, lap and fillet welds on steel 16 gauge through ½”
Assembly and maintenance welding
Welding Current

DCEN (Electrode Negative, Straight Polarity)

Typical Chemical

Composition of Deposition Metal (%)

C
Mn
Si
S
P
Ni

≤0.12
≤1.50
≤0.80
≤0.03
≤0.03
≤0.50

0.05
1.28
0.36
0.008
0.010
0.46



Typical Mechanical Properties of Deposited Metal

Yield Strength
(Mpa)
Tensile
(Mpa)
Elongation
(%)
Charpy V-notch Impact energy
-20Degrees Celsius(J)
≥400
≥480
≥22
≥27
450
570
30
120

Size and Recommended Current Range (DC:Wire(+))

Wire Dia(mm)
1.2
1.4
1.6

Current
Range(Amp)
Flat
120-300
150-380
180-420
Horizontal
120-300
150-350
180-380
Vertical-up/overhead
120-260
150-270
180-280
vertical-down
200-300
200-300
180-350





flux welding wire AWS E71T-1

flux cord wire AWS E71T-1 GB E501T-1
1.Certificate:ISO 9001:2000
2.Used for high effciency welding in all position
flux cord wire E71T-1

is a self-shielding flux cored wire used for welding carbon steels. This product does not require a shielding gas and can be used in limited multi-pass welding operations. The bead appearance is not equal to a gas-shielded product, but the benefits of not having to use gas makes this product popular. E71T-11 operates on straight polarity only (DCEN).
Typical Applications

Butt, lap and fillet welds on steel 16 gauge through ½”
Assembly and maintenance welding
Welding Current

DCEN (Electrode Negative, Straight Polarity)

flux wire e71

1.flux cored wire E71T-1
2.firm coating wire with good welding property
3.rich specification with high quality
China Welding products

Name
Welding Wire ER 70s-6
Flux Cored Wire E71T-1
Welding Electrode E6013
Welding Electrode E7018
Wire Gauge
0.8mm-1.6mm
0.8mm-1.6mm
2.0mm-5.0mm
2.0mm-5.0mm

Rich kinds of welding products you can get form us.For the trial order we give the best price to push sales.
Welding product features:
1. Low welding costs.
2. High productivity and low electricity consumption.
3. Easy to operate. All-position welding.
4. Good welding seams,less spatter.

flux-cored solder wire(Sn63Pb37)

flux-cored solder wire
Spec:
Sn60Pb40, Sn63Pb37, Sn55Pb45, Sn50Pb50, Sn45Pb55, Sn40Pb60, Sn35Pb65, Sn30Pb70, Sn25P75

flux-cored solder wire:

Resin-core solder wire(SGS)
Feature:
Even and bright welding spot, favorable diffusion performance, no corrosion, no pungent smell, and no harm for integrate circuit or sensitive electronic elements; applied to frontier technologies in the fields of aviation, electronics, military industry, communication, and computer, etc.

No-clean tin wire(SGS)
Feature:
M type (no halogen) and ML type (with halogen) no-clean tin wire, which are manufactured by high-tech multi-element formula, reach tin wire standard for SJ/T11168-98 no-clean braze welding. It is of reliable welding spot, cleanness, nice appearance, high insulation resistance after welding, low ion pollution, and little residue of PCB plate after welding, etc, and suitable for no-clean technique standard of high-precision high-performance electronic products. Our company provides no-clean tin wires with various tin contents and linear diameters for clients.


Tin wire for capacitor(SGS)
Feature:
It accords with RA Grade standard of GB/T3131-2001 Standard; it is widely used in capacitor manufacturing, directly realizing soft soldering connection on the galvanized coating and gold alloy coating on the head face of capacitor, and suitable for braze welding of metal base which is hard to weld, such as nickel plating part, galvanized part, Dumet wire, and copper, etc; and it is of high soldering speed, brightness, nice appearance, and reliable joint quality, etc.


flux-cored welding wire AWS E71T-1

flux cord welding wire AWS E71T-1 GB E501T-1
1.Certificate:ISO 9001:2000
2.Used for high effciency welding in all position
flux cord wire E71T-1

is a self-shielding flux cored wire used for welding carbon steels. This product does not require a shielding gas and can be used in limited multi-pass welding operations. The bead appearance is not equal to a gas-shielded product, but the benefits of not having to use gas makes this product popular. E71T-11 operates on straight polarity only (DCEN).
Typical Applications

Butt, lap and fillet welds on steel 16 gauge through ½”
Assembly and maintenance welding
Welding Current

DCEN (Electrode Negative, Straight Polarity)

0.8mm-1.6mm Professional MIG co2 welding wire ER70S-G

0.8mm-1.6mm Professional MIG co2 welding wire ER70s-G
a.package:15kg/spool;20kg/spool;25kg/spool
b.diameter:0.8-1.6mm
0.8mm-1.6mm Professional MIG co2 welding wire ER70S-G

Uses:
1. Used for welding all kinds of 500MPa structural steel parts, thick plates and thick pipelines.
2. Used for high speed welding on 500MPa base metals

Chemical Composition of Welding Wire(%)

C
Mn
Si
S
P
Ti+Zr
≤0.15
1.40-1.90
0.55-1.10
≤0.030
≤0.030
≤0.30

Examples of Chemical Composition of Deposited Metal (%)

C
Mn
Si
S
P
Ti+Zr
0.08
1.25
0.67
0.007
0.013
0.14

Mechanical Properties of Deposited Metal

Test Item
R
m
(MPa)
R
eL OR
R
p0.2
(Mpa)
A(%)
KV
2
(J)
Guarantee Value
≥500
≥420
≥22
According to Customers’Need(-30°C)
General Result
593
520
25
157

Reference Current
(DC+)
Wire Size(mm)
Welding Current(A)
CO
2
Flow Rate(L/min)
φ0.8
50~100
15
φ1.0
50~220
15~20
φ1.2
80~350
15~25
φ1.6
170~550
20~25

Argon arc Welding Wire

We gained good reputation for our low price but high quality among our customers. So we hope we can have business relations with
Argon Arc Welding Wire


1. Diameter: 0.8mm, 1.0mm, 1.2mm, 1.6mm
2. Welding Wire is flat in surface.

The content is as follows:

C
Si
Mn
P
S
Cr
Mo
V
Cu
Ni
0.07
0.85-0.90
1.45-1.50
0.14-0.20
0.01-0.02
0.04
0.01-0.02
0.008-0.010
0.02
0.030


Mechnical Proprties:
Rel or Rp0.2
( Mpa)
Rm
A(%)
Z(%)

370-375
535-545
27.5-28.5

flux-cored welding wire E71T-1.

flux-cored welding wire
Performance
The wire for calcium oxide-type fluoride slag, CO2 gas shielded flux cored wire.

flux-cored welding wire E71T-1
Dia: 0.8mm 1.0mm 1.2mm 1.6mm
15kg/spool with carton box and pallet.

Typical chemical composition of deposited Metal(%)

Mechanical properties of deposited metal
GB
AWS
Tensile Stength
σb(Mpa)
Yield Stength
σ0.2(Mpa)
Elongation
δ5(%)
Impact Value(J)
E501T-1
E71T-1
490-660
≥400
≥22
≥47(-20)

Wire apply to the corresponding level of tensile strength carbon steel and low-alloy steel and steel containers important structural welding. Can be widely used in shipbuilding, machinery manufacturing, petrochemical, metallurgical, rolling stock and other industrial sectors.


flux-cored welding wire R316L-T1-5,welding rod,welding material, welding wire

TIG welding wire products of single welding and double-face moulding, without argon gas on the back.

Specification
GB
AWS
JIS
R316L-T1-5
R316L-T1-5

Typical Mechanical Composition
of Deposited metal(%)
C
Si
Mn
Cr
Ni
Mo
V
AL
S
P
Other
0.016
0.92
2.16
18.79
12.57
2.64


0.016
0.028

Typical Mechanical Properties
of Deposited metal
Rm(Mpa)
ReH(Mpa)
A5(%)
Akv(J)
517

46

Characteristics and Application

TIG welding wire products of single welding and double-face moulding, without argon gas on the back, for underlaying of 18-12Mo2 extra low carbon stainless steel pipe.


Shielding Gas
Ar

flux-cored welding wire

Special welding wire for forced moulding of electrogas welding, high welding efficiency.
Special welding wire for forced moulding of electrogas welding, high welding efficiency, for vertical long straight connecting welding of medium thick plates of ships, silos, metallurgical furnaces, etc.
Specifications
Special welding wire for forced moulding of electrogas welding, high welding efficiency.

welding wire
Specification
GB
AWS
JIS
TH550
A 5.20(E71T-1)
EN440(G4Si1)

Typical Mechanical Composition
of Deposited metal(%)
Fe
Si
Mn
C
S
Cu
Al
Ni
P
Zn
Other

0.50
1.45
0.04
0.010



0.012



Typical Mechanical Properties
of Deposited metal
Rm(Mpa)
ReH(Mpa)
A5(%)
Akv(J)
410
500
20
27

Characteristics and Application

Special welding wire for forced moulding of electrogas welding, high welding efficiency, for vertical long straight connecting welding of medium thick plates of ships, silos, metallurgical furnaces, etc.

Shielding Gas
ZJW
Our company has passed the ISO9001:2000 quality system and its main products have been approved by TUV,DB,LR,ABS,CCS. It has always been sticking to the tenet of " first rate products, reputations and services" to make full efforts to serve for its customers.

flux-cored welding wire

Special welding wire for forced moulding of electrogas welding, high welding efficiency.
Special welding wire for forced moulding of electrogas welding, high welding efficiency, for vertical long straight connecting welding of medium thick plates of ships, silos, metallurgical furnaces, etc.
Specifications
Special welding wire for forced moulding of electrogas welding, high welding efficiency.

welding wire
Specification
GB
AWS
JIS
TH550
A 5.20(E71T-5)
EN440(G4Si1)

Typical Mechanical Composition
of Deposited metal(%)
Fe
Si
Mn
C
S
Cu
Al
Ni
P
Zn
Other

0.45
1.39
0.06
0.014



0.013



Typical Mechanical Properties
of Deposited metal
Rm(Mpa)
ReH(Mpa)
A5(%)
Akv(J)
420
480
22
27

Characteristics and Application

Special welding wire for forced moulding of electrogas welding, high welding efficiency, for vertical long straight connecting welding of medium thick plates of ships, silos, metallurgical furnaces, etc.


Shielding Gas
ZJW

Thursday, January 27, 2011

flux-cored welding wire

Performance
The wire for calcium oxide-type fluoride slag, CO2 gas shielded flux cored wire.
welding wire Performance
The wire for calcium oxide-type fluoride slag, CO
2
gas shielded flux cored wire. Its excellent performance welding process, DC DCRP, arc stability, a small spatter, slag from easy, weld forming good for the peace of welding, Wang 400km welding and welding. Molten metal excellent mechanical properties, diffusible hydrogen content is low, high impact toughness, cracking good.

flux-cored welding wire

flux-cored welding wire:
Performance :The wire for calcium oxide-type fluoride slag, CO2 gas shielded ,flux cored wire.
welding wire Performance
The wire for calcium oxide-type fluoride slag, CO
2
gas shielded flux cored wire. Its excellent performance welding process, DC DCRP, arc stability, a small spatter, slag from easy, weld forming good for the peace of welding, Wang 400km welding and welding. Molten metal excellent mechanical properties, diffusible hydrogen content is low, high impact toughness, cracking good.

flux-cored welding wire

WELDING WIRE:
The wire for calcium oxide-type fluoride slag, CO2 gas shielded ,flux cored wire.
welding wire Performance
The wire for calcium oxide-type fluoride slag, CO
2
gas shielded flux cored wire. Its excellent performance welding process, DC DCRP, arc stability, a small spatter, slag from easy, weld forming good for the peace of welding, Wang 400km welding and welding. Molten metal excellent mechanical properties, diffusible hydrogen content is low, high impact toughness, cracking good.

Argon arc Welding Wire

Argon arc Welding Wire
1. Diameter: 0.8mm, 1.0mm, 1.2mm, 1.6mm
2. Used in welding manufacturing of steel structure products.
Argon Arc Welding Wire


1. Diameter: 0.8mm, 1.0mm, 1.2mm, 1.6mm
2. Used in welding manufacturing of steel structure products.

The content is as follows:

C
Si
Mn
P
S
Cr
Mo
V
Cu
Ni
0.07
0.85-0.90
1.45-1.50
0.14-0.20
0.01-0.02
0.04
0.01-0.02
0.008-0.010
0.02
0.030


Mechnical Proprties of deposited metal:
Rel or Rp0.2
( Mpa)
Rm
A(%)
Z(%)

370-375
535-545
27.5-28.5




Uses:
They are mainly used in low carbon steel and alloy and widely used in vehicles, bridge projects, ship building and containers. We gained good reputation for our low price but high quality among our customers. So we hope we can have business relations with your company.

flux-cored welding wires

gas-shielded flux-cored welding wire and self-shielded flux-cored welding wire.
Gas-shielded Flux-cored Welding Wire
Model
GB
AWS
Current
Main Applications
UN.YD132-1


DC+
It is a kind of titania type CO2 gas-shielded flux-cored welding wire used for surfacing welding. Suitable for the situation of impact-resistance and medium wear. Used for repairing the surfaces of low-carbon steel, medium-carbon steel or low-alloy steel parts, such as the surfacing welding and repairing of mining machinery and agricultural machinery.
UN.YD172-1


DC+
Suitable for the situation of impact-resistance and medium wear. Used for surfacing welding on some worn-out gears, dredge buckets, tractor blades, deep digging blade ploughs, mining machinery, etc.
UN.YD212-1


DC+
Suitable for the situation of impact-resistance and medium wear. Used for single layer or multi-layer surfacing welding and repairing of the surfaces of all kinds of worn-out parts, such as gears, dredge buckets, mining machinery, etc.
UN.YJ501-1
E501T-1
E71T-1
DC+
Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.
UN.YJ501Ni-1
E501T1-G
E71T1-G
DC+
Used for welding structures made of low temperature steel and low-alloy structural steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
UN.YJ501NiCrCu-1


DC+
Suitable for welding some steel structures like railway locomotive vehicles, containers, etc. made of 09CuPCrNi, 09CuTiRe and 09CuPRe steel.
UN.YJ502-1
E500T-1
E70T-1
DC+
Used for welding structures made of carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Most widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, boilers, petroleum machinery, chemical machinery, hoisting machinery, etc.
UN.YJ502Ni-1
E550T1-Ni1
E80T1-Ni1
DC+
Used for welding structures made of low temperature steel and low-alloy high strength steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
UN.YJ507-1
E500T-5
E70T-5
DC+
Used for welding carbon steel and low-alloy structural steel with tensile strength higher than or equal to 490MPa. Used for welding some key structures like shipbuilding, vehicles, mechanical manufacture, pressure vessels, petrochemical machinery, hoisting machinery, etc.
UN.YJ551Ni-1
E551T1-Ni1
E81T1-Ni1
DC+
Used for welding structures made of low temperature steel and low-alloy structural steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.
UN.YJ551Ni-2
E551T1-Ni2
E81T1-Ni2
DC+
Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
UN.YJ551NiCrCu-1
E551T1-W
E81T1-W2
DC+
Used for welding 590MPa atmospheric corrosion-resistant steel structures, such as railway locomotive vehicles, offshore engineering, bridges, etc.
UN.YJ601Ni-1
E551T1-Ni1
E81T1-Ni1
DC+
Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
UN.YJ601Ni1.5-1
E551T1-K2
E81T1-K2
DC+
Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
UN.YJ601Ni2-1
E551T1-Ni2
E81T1-Ni2
DC+
Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
UN.YR302
E551T1-B2
E81T1-B2
DC+
Suitable for welding 1Cr0.5Mo (such as 15CrMo) steel below 520.
UN.YR402
E601T1-B3
E91T1-B3
DC+
Suitable for welding 2.25Cr1Mo steel below 520.
UN-308L
E308LT1-1
E308LT1-1

Used for welding corrosion-resistant 0Cr19Ni9 and 0Cr19Ni11Ti stainless steel structures below 300. Used for welding some stainless steel materials like 301, 302, 304, 304L, 308, 308L, etc.
UN-309L
E309LT1-1
E309LT1-1

Used for stainless steel structures of the same types, composite steel, dissimilar steel, etc. in the production of equipment of synthetic fiber, petrochemical industry, etc., and also used for surfacing welding on nuclear reactors and transition layers of pressure vessel inner surfaces and welding inner parts of synthesis towers.
UN-316L
E316LT1-1
E316LT1-1

Used for welding ultra-low-carbon 00Cr18Ni12Mo3 stainless steel, and also used for welding Cr stainless steel which does not need heat treatment after welding, composite steel and dissimilar steel.

flux-cored wire

The wire-type titanium dioxide slag for CO2 gas shielded flux-cored wire welding. Welding excellent performance, splash a small,
Standard
:
GB/T10045-2001 E501T-1, AWS A5.20-1995 E71T-1
Introduction
:
This is a TiO
2
-based CO
2
gas-shielded flux-cored wire, performance welding process, small spatter, stable arc, slag off easy, beautiful weld shape, all position welding.
Application
:
It is

applied to weld low-carbon steel and low-alloy steel which tensile strength is greater than 500MPa, also can be used in metallurgy, machinery, petrochemical, locomotive, ship, container, bridge, construction, nuclear power, pressure Vessels, steel frame and so on.
Welding Parameter
Size
(mm)
Current
(A)
Voltage
(V)
CO
2
Gas Flow
(L/min)
Wire Elongation
(mm)
Welding Speed
(cm/min)
Torch
Inclination
Current Type
Φ1.2
120~300
20~30
15~20
15~20
34~36
80°
DCEP
Φ1.4
140~320
23~31
Φ1.6
160~360
25~32
Chemical Composition and
Mechanical Properties
Grade
Item
C
Mn
Si
S
P
AKV
(-20)
σ
s
σ
b
δ
5
TY-YJ502(Q)
Standard
≤0.18
≤1.75
≤0.90
≤0.03
≤0.03
≥27
≥400
≥480
≥22
Test
0.05
1.20
0.32
0.011
0.017
110
500
580
24.5

flux-cored wire

1.Resistant to 400 ~ 500 of high temperature
2.Suitable for surfacing welding parts of manufacture and repair
DYD61X series high chromium cast iron surfacing flux cored welding wire is one of characteristic products in our company.With extremely high abrasion resistance, it is widely used in manufacturing and repairing of wear material of the industries of mine, electric power, metallurgy, architecture and so on. The longer service life of abrasion pieces is improved by the correct selection of surfacing flux cored welding wire. DYD61X series are significant for the broad economic efficiency and huge social value.

Welding Wire
Hardness
Chemical Composition of Surfacing Layer (Weight %)
Performance and Typical Application
Type
HRC
C
Cr
Si
Mn
other
Fe
DYD611
55
4.5
25
1
1.3

the rest
The surfacing layer that contained thousands of carbides is optimal abrasion-resistant and high temperature with 400 Centigrade from 500 Centigrade.The advantage of the surfacing layer :the stress is releasing and welding cracks is in close texture. It is applicable in manufacturing and repairing of wear material such as Pulverizer Roll Wheel, the liner of thermal power plant and vertical grinding roll, Liner Plate, blade of Auger Drill of cement factory.
DYD612
58
5.5
30
0.8
1.1

the rest
DYD613
60
5.5
31
1.1
0.6
1.1
the rest
DYD614
60
6.2
35.5
1.3
0.8
1.4
the rest
DYD615
60
5.6
32
0.9
1.1
1.5
the rest
DYD616
60
5.5
35
1.1
1.2
2.7
the rest
DYD619
59
5.6
26
0.4
0.6
13.5
the rest
This welding wire is not merely used in addition to the circumstances of above mentioned .It is 3 times abrasion resistance than DYD61 and able to withstand a 500 Centigrade from 700 Centigrade temperature.

fluxed-cored wire E71T-1 welding electrode

Rutile flux-cored wire used for low carbon steel and Grade 490MPa high strength steel.
Rutile flux-cored wire used for low carbon steel and Grade 490MPa high strength steel
Purpose: Suitable for welding in fields such as shop body, bridge, construction steel structure, manufacture of Machinery and vehicle, etc.
Main Characteristics:
1)Good all-position welding, less fume, convenient and safe operation
2)Good welding process, stable and mild arc with less splashing, even slag and good removability of slag
3)Good anti-porosity of primer, smooth and beautiful welding, stable and reliable welding quality
4)Clean and smooth wire, continuous and reliable feeding, fast welding, high efficiency and low cost
Equivalent Standard: AWS A5.20/ASME SFA5.20 E71T-1 JIS Z3313 YFW-C50DR
Protection Gas: 100%CO2
Chemical Content of Fusing Metal(%)

C
Si
Mn
P
S
≤0.1
0.2~0.7
0.9~1.60
≤0.025
≤0.025

Mechanic Property of Fusing Metal (protection gas CO
2
)
Yield strength N/mm 2
Tensile strength N/mm 2
Elongation Rate (%)
Test Temperature ºC
CVN- Shock Value
≥390
≥490
≥22
0
60

Available Sizes and Recommended Current (DC negative polarity connection)
Diameter(mm)
φ1.2
φ1.4
φ1.6
Welding current
(A)
Horizontal welding, horizontal fillet welding
120~300
200~400
200~450
Vertical upward welding, overhead position of welding
120~260
180~280
180~280
Vertical downward welding
200~300
220~320
250~300

fluxed-cored wire E71T-1 welding electrode

Rutile flux-cored wire used for low carbon steel and Grade 490MPa high strength steel.
Rutile flux-cored wire used for low carbon steel and Grade 490MPa high strength steel
Purpose: Suitable for welding in fields such as shop body, bridge, construction steel structure, manufacture of Machinery and vehicle, etc.
Main Characteristics:
1)Good all-position welding, less fume, convenient and safe operation
2)Good welding process, stable and mild arc with less splashing, even slag and good removability of slag
3)Good anti-porosity of primer, smooth and beautiful welding, stable and reliable welding quality
4)Clean and smooth wire, continuous and reliable feeding, fast welding, high efficiency and low cost
Equivalent Standard: AWS A5.20/ASME SFA5.20 E71T-1 JIS Z3313 YFW-C50DR
Protection Gas: 100%CO2
Chemical Content of Fusing Metal(%)

C
Si
Mn
P
S
≤0.1
0.2~0.7
0.9~1.60
≤0.025
≤0.025

Mechanic Property of Fusing Metal (protection gas CO
2
)
Yield strength N/mm 2
Tensile strength N/mm 2
Elongation Rate (%)
Test Temperature ºC
CVN- Shock Value
≥390
≥490
≥22
0
60

Available Sizes and Recommended Current (DC negative polarity connection)
Diameter(mm)
φ1.2
φ1.4
φ1.6
Welding current
(A)
Horizontal welding, horizontal fillet welding
120~300
200~400
200~450
Vertical upward welding, overhead position of welding
120~260
180~280
180~280
Vertical downward welding
200~300
220~320
250~300

free lead tin solder

free lead tin solder
1.Diameter: 0.5mm-9.0mm
2.Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,/25/75 20/80
3.Weight:50~1000g...
Detailed Product Description
Products through the international inspection agency SGS testing, all targets were met and far better than the ROHS directive.
1. High-purity, outstanding weldability, good infiltration.
2. after clean, artistic, welds, insulates, the resistance to be high, after the ion pollutes, the PCB board to weld lowly, remains extremely few.
3. good oxidation resistance, low tin dregs, economical cost.
4. The spot luminous, is full and is even.
5. the economy, can produce most reliable spots by the lowest soldering tin consumption.

Alloy(Brand No)

Solidify and fluidity Temp. ()

Bar
Solder wire
Rosin Single-core

Rosin Three-core
Water-soluble
Sn63Pb37
183
S
S
R
R
Sn60Pb40(Sb0.3-0.8)
183 ~190
S
S
R
R
Sn55Pb45(Sb0.3-0.8)
183 ~203
S
S
R
R
Sn50Pb50(Sb0.3-0.8)
183 ~215
S
S
R
R
Sn55P45
183 ~227
S
S
R
R
Sn90Pb10
183~215
S
S
R
R
Sn40Pb60
183-238
S
S
R
R
Sn30Pb70(Sb1.5~2.0)
183-258
S
S
R
R
S: Available in stock . R: Available upon request.

Tin-silver solders:


Brazing Alloy
Standard number
Composition %
Melting Range
Principal areas of Application
Ag
Sn
Solidus
Liquidus
HAg-4S
3.4~4.5
Rem
221
230
Eutectic,Low temperature solder,with good flowproperty and innocuous,suitable forsoldering ferrous and non-ferrous materials,especially in food industry.
Hag-6S
5.5~6.5
Rem
221
270
Wider melting range than Hag-4s,so good at brazing those with big gap.

free sample CO2 gas shielded welding wire ER70S-6 0.8-1.6mm

1welding wire model No.:ER70s-6
2material:CO2
3diameter:0.8mm-1.6mm
4melting point:1300
Description:
ER70S-6
is a kind of mild steel copper coated welding wire , suitable for 100% CO2 and Argon & CO2 mixed gas protective welding with stable feasibility , good welding seams , less spatters and excellent welding process properties.
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1

Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg

chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position

Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work parts



free sample CO2 gas shielded welding wire er70S-6 0.8-1.6mm

welding wire:ER70S-6:0.8~1.6mm
Certificate:ISO9001:2000
Free sample be provided
stable arc,little splash,good welding seam



CO2 Welding Wire
Performance
This product adapts advanced copper electroplating technology. The surface of welding wire is smooth and level and the copper layer is uniform and firm. Being adapted cisarrangement technique. it has excellent weld technology property and many advantages such as stable arc. small splashing, smooth and beautiful weld line, convenient to send welding wire and high work efficiency,etc. It is suitable for auto and semi-auto omniberaing weld.
Welding wire chemical Composition(%)
Trade mark \Composition
C
Mn
Si
S
P
Ni
Mo
Cr
Cu
ER49-1
≤0.11
1.80-2.10
0.65-0.95
≤0.030
≤0.030
≤0.30
----
≤0.20
≤0.50
ER50-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025

----

≤0.50
Mechanical properties of deposited metal
Trade mark \Performance
Yield strength Mpa
Tensile strength Mpa
Extension rate (%)
Shock valueJ()
Protect gas
ER49-1
≥372
≥490
≥20
≥47(Room temperature)
CO
2
ER50-6
≥420
≥500
≥22
≥27(-29)
CO
2
Specification and reference current
Diameter(mm)
0.80
1.00
1.20
1.60
Currents(A)
40-140
70-250
80-350
170-550
Voltage(V)
16-21
17-27
18-30
23-43
Use
Apply to the alloy steel of low carbon mainly, is extensively used in the vehicle, the science of bridge buliding, engineering machinery, steel construction, shipping making, trade container, etc

free sample CO2 gas shielded welding wire er70s-6 0.8 0.9 1.0 1.2 1.6mm

welding wire:ER70S-6:0.8~1.6mm
Certificate:ISO9001:2000
Free sample be provided
stable arc,little splash,good welding seam



CO2
Welding Wire
Performance
This product adapts advanced copper electroplating technology. The surface of welding wire is smooth and level and the copper layer is uniform and firm. Being adapted cisarrangement technique. it has excellent weld technology property and many advantages such as stable arc. small splashing, smooth and beautiful weld line, convenient to send welding wire and high work efficiency,etc. It is suitable for auto and semi-auto omniberaing weld.
CO2 GAS SHIELDED WELDING WIRE
Type
China Natinal Standard (GB)
Internatinal
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temper ature
TensileNum KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltdge Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
Packing: 5kg/15kg/18/20kg per spool with pallet
spool size: D200/270/300 K300
Certificate: ISO 9001:2000

Argon arc welding wire (B)

Spec.:0.6 0.8 1.0 1.2 1.6 2.0 2.4
We also welcome OEM, according your special requirement
Argon arc welding wire(A)has excellent performance, high efficiency, stable arc weld moulding, small splash, good, porosity, no crack characteristics, it is also used for argon protection and suitable for welding of high performance requirements.

free sample of welding wire ER706-6

welding wire ER70s-6:
1)good weldability
2)low residue
3)low splash
4)high reliability
welding wire ER706-6:

We offer the items of the welding wire by the brand of ER50-6,ER70s-6,E501T-1,E711T, H08A,H08MnA,which has the specification of 0.8~φ5.0mm for your choosing.In addition,we also supply welding rod of J501Fe18,J422,J502,J506,J507 and stainless steel electrode A102 and 431 welding flux.our final products are with homogeneous coating and good anti-rust properties and also with the advantages such as stablity in the arc, little spatter, beautiful shape and strong weldability. The products are applied to vehicles, buildings, bridges, shipbuilding, Iron, Steel and pressure vessel industries, and can also be applied to high-speed welding for sheet metal and piping.
.


Trade Mank
Diameter
Lot No
Mfg Date
Executive Standard
Type
Date of lssue
ER 70S-6 (ER 50-6)
Φ1.2mm
X020892
2010-8-30
GB/T 8110-1995
ER 70S-6 (ER 50-6)
2010-8-30
Mechanical Properties of Deposited Metal
Chemical Compositions of the welding wire
Item
Specifieation
Actual Result
Element
Specification
Actual Result
Element
Specification
Actual Result
Tensile Strength
≥500
525
C
0.06-0.15
0.07
Cr
___
0.039
σb(Mpa)
Yield Strength
≥420
435
Mn
1.40-1.85
1.56
Ni
___
0.015
60.2(Mpa)
Elongation
≥22
28
Si
0.80-1.15
0.9
Cu
≤0.50
0.018
δ5(%)
V Impact Tem
-29
-29
S
≤0.035
0.012



(°C)
Impact Yalue
≥27
94 95 73
P
≤0.025
0.01



Impact Yalue

g3si1 welding wire

welding wire ER70S-6
dia:0.8,0.9,1.0,1.2,1.6mm
packing:5kg,15kg/spool,drum packing,k300 packing
Iso9001
attractive price
Welding Wire ER70S-6


Description:
ER70S-6 is a kind of mild steel copper coated welding wire , suitable for 100% CO2 and Argon & CO2 mixed gas protective welding with stable feasibility , good welding seams , less spatters and excellent welding process properties.
Application:

Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
5kg packing:
15kg packing(D300)

metal spool packing(K300)
drum packing:(150kg-250kg)
Conform with:
GB/T 8110 ER50-6
ISO 636-A-W 42 3G3Sil
ISO 636-B-W 49A 3 W6
DIN SG2 JIS YGW12
AWS A5.18 ER70S-6
BS EN 1668-W 42 3 G3Sil
JIS Z3316 YGT50

Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg

chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)

Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position

Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work part
We also produce aluminium welding wire stainless steel wire

gal welded wire mesh

gal welded wire mesh
ISO 9001:2000
big factory with twenty years history
Good stable quality competitive price
gal welded wire mesh

1.chain link fence also called diamond wire mesh.
2.weaveing and characteristics:link and weaving.the weaving is simple,artistic and pracitical.
3.mesh/inch:1/2----2.
4.wire diameter:1.63mm-4.06mm.
5.Uses:The products use a wide range,feeding chickens.ducks,geese,rabbits and zoo fence machinery and equipment protection,highway guardrail,sports venues fence,the road green,belt protection net.The mesh in the production of container into a box and strong,the cage filled with rocks,etc.can be used to proction and support the seawall,hillsides,road and bridge reservoirs and other civil engineering.It can be used in the manufacture of handicrafts machinery and equipment of the transmission network
6.specification:
Mesh
1"
1.5"
2"
2.25"
2.4"
2.5"
3"
4"

25mm
40mm
50mm
55mm
60mm
65mm
76mm
100mm
SWG
18#-7#

1.20mm-5.00mm
Net Long
1.0m-50m
Net Width
0.5m-5.0m

galvanized Welded Wire Mesh Panel

Welded Wire Mesh Panel :
1.Welded Stainless Steel Wire Mesh Panels
2.Galvanized Welded Mesh Panels
3.Hot-dip Zinc Panels
Welded Wire Mesh Panel is made of superior quality welded mesh, with flat even surface, firm structure, be used extensively in building, food, agriculture and so on.

Diameter(mm)
Aperture (mm)
Width(m)
Length
Inch
MM
2.0mm-3.2mm
1"
25.4
0.914m-1.83m
The length does not limit
2.0mm-4.5mm
2"
50.8
0.914m-2.75m
2.0mm-6.0mm
3"
70.2
0.914m-2.75m
2.0mm-6.0mm
4"
101.6
0.914m-2.75m
2.0mm-6.0mm
5"
127
0.914m-2.75m
2.0mm-6.0mm
6"
152.4
0.914m-2.75m
2.0mm-6.0mm
7"
177.8
0.914m-2.75m
2.0mm-6.0mm
8"
203.2
0.914m-2.75m

galvanized Welded Wire Mesh fence

1.Welded Mesh
2.surface:galvanized&PVC coated
3.method:welded
4.hole shape:square
5.fence length:2m,2.5m
galvanized Welded Mesh

Materials:

low carbon steel wire, Al-Mg alloy wire.

Processing:
weaving and welding


Fence length:
2m, 2.5m as standard

Application:
Prevention for road, railway, airport, residence district, seaport, garden, feeding and husbandry.

Specification of Wire Mesh Fence
Spotted by 4mm diameter quality mild steel wire
Opening (mm)
75x150
L x W (mm)
1800x3000
Frame (mm)
20x30x1.5
PVC coating thickness (mm)
0.7-0.8
With coating (mm)
4.8
Support post (mm)
diameter 48x2x2200
Base for fence(mm)
500x300x300

Welded Wire Mesh
Galvanized/PVC coated Welded Wire Mesh
Opening
Wire Diameter
In inch
In metric unit(mm)
1/4" x 1/4"
6.4mm x 6.4mm
22,23,24
3/8" x 3/8"
10.6mm x 10.6mm
19,20,21,22
1/2" x 1/2"
12.7mm x 12.7mm
16,17,18,19,20,21,22,23
5/8" x 5/8"
16mm x 16mm
18,19,20,21
3/4" x 3/4"
19.1mm x 19.1mm
16,17,18,19,20,21
1" x 1/2"
25.4mm x 12.7mm
16,17,18,19,20,21
1-1/2" x 1-1/2"
38mm x 38mm
14,15,16,17,18,19
1" x 2"
25.4mm x 50.8mm
14,15,16
2" x 2"
50.8mm x 50.8mm
12,13,14,15,16
Technical Note:
1.Standard roll length: 30m;width: 0.5m to 1.8m.
2.Special sizes available at request.
3.Packing: in waterproof paper in rolls. Custom packing available at request.

galvanized iron wire

Galvanized Iron Wire
BWG8-BWG38 (4mm to 0.15mm)
Zinc rate:20g/mm2-388g/mm2
Tensile strength:300-1600N
0.3-1000kg/coil
Galvanized Iron Wire


Factory export directly

Galvanized Iron Wire is the most important wire products of Zhongcheng for export.

BWG8-BWG38 (4mm to 0.15mm)
Zinc rate:20g/mm2-388g/mm2
Tensile strength:300-1600N
0.3-1000kg/coil

Standard sizes for:
Electro Galvanized Iron Wire:
BWG8 to BWG38 from 4.0mm to 0.15mm
Hot-dipped Galvanized Iron Wire :
BWG8 to BWG36 from 4.0mm to 0.19mm
Wire with smaller diameter or bigger one also available for your choice.


Technical information:
Electro Galvanized Iron Wire Processing with low carbon steel wire, through drawing and electric galvanizing
Hot-dipped Galvanized Iron Wire :Zhongcheng produces good quality hot-dip galvanized iron wire from the choice of low carbon steel wire, through the process of wire drawing, acid washing and rust removing, annealing and coiling. This kind of wire is extensively used in construction, , handicrafts, woven wire mesh, express way fencing mesh, packaging of products and other daily uses.

Purpose:
mainly for communications equipment, medical equipment and weave net, brushes, cables, filters, high-pressure pipe, construction, handicrafts and other fields
Characteristic & Applications:
High Zinc Coating with super corrosion resistance, firmed and well-proportioned Zinc Coating, slippery surface, used in the weaving of wire mesh and reprocessing, widely used in industry, agriculture and stock breeding.
Package:
0.3-1000kg are available, inner packing by PVC strips, outer packing by gunny bag
We can supply according to clients' requirements!



galvanized iron wire

materials:Q195.
KINDS:hot galvanized iron wire,electroplate iron wire,PVC coated galvanized iron wire.

galvanized square wire mesh

galvanized square wire mesh
material:low-carbon wire,G.I wire,ss wire,brass wire,etc
useage:window screening,safety guards,etc
Galvanized square wire mesh
is made of selected plain steel wire with precise construction, uniform mesh, excellent corrosion and rust resistance.
Galvanized Wire Mesh is mostly used as window screening, safety guards on machinery enclosures. It's also used in filtering liquid and gas, sieving grain.
We are in a position to supply
galvanized wire mesh
from mesh to mesh. The sizes can be produced as per customers' requirement.
The following specifications are listed for your reference:
Mesh
Wire Dia.(mm)
Opening(mm)
3
1.60
6.87
4
1.20
5.15
5
0.95
4.13
6
0.80
3.43
8
0.70
2.43
10
0.60
1.94
12
0.55
1.56
14
0.41
1.40
16
0.35
1.24
18
0.30
1.11
20
0.27
1.00
22
0.25
0.90
24
0.23
0.83
26
0.20
0.78
28
0.18
0.73
30
0.15
0.70
35
0.14
0.59
40
0.14
0.50
50
0.12
0.39
60
0.12
0.30
Galvanized Square Wire Mesh is mostly used as window screening, safety guards on machinery enclosures. It's also widely used in filtering liquid and gas, sieving grain.

Argon arc welding wire(A)

Argon arc welding wire(A) Spec.:0.6 0.8 1.0 1.2 1.6 2.0 2.4
Argon arc welding wire(A)has excellent performance, high efficiency, stable arc weld moulding, small splash, good, porosity, no crack characteristics, it is also used for argon protection and suitable for welding of high performance requirements.

galvanized welded panel

galvanized welded panel
ISO 9001:2000
big factory with twenty years history
Good stable quality competitive price
galvanized welded panel

1.chain link fence also called diamond wire mesh.
2.weaveing and characteristics:link and weaving.the weaving is simple,artistic and pracitical.
3.mesh/inch:1/2----2.
4.wire diameter:1.63mm-4.06mm.
5.Uses:The products use a wide range,feeding chickens.ducks,geese,rabbits and zoo fence machinery and equipment protection,highway guardrail,sports venues fence,the road green,belt protection net.The mesh in the production of container into a box and strong,the cage filled with rocks,etc.can be used to proction and support the seawall,hillsides,road and bridge reservoirs and other civil engineering.It can be used in the manufacture of handicrafts machinery and equipment of the transmission network
6.specification:
Mesh
1"
1.5"
2"
2.25"
2.4"
2.5"
3"
4"

25mm
40mm
50mm
55mm
60mm
65mm
76mm
100mm
SWG
18#-7#

1.20mm-5.00mm
Net Long
1.0m-50m
Net Width
0.5m-5.0m

galvanized welded wire mesh factory

ISO9001:2000
Stainless Steel,Galvanized and PVC coated.
Mesh:1/4",3/8",5/8",1/2",3/4",1" to 6"
Gauge:#12--#24
Welded Wire Mesh

Our products can be divided into four series: Welded Wire Mesh, basically electro galvanized welded wire mesh, hot dipped galvanized welded wire mesh, PVC coated welded wire mesh, welded steel gratings, reinforcement welded mesh panels, welded wire mesh panels, fencing panels, welded wire partitions, welded wire grills, welded wire mesh fences, welded wire mesh cages, welded wire mesh shelves, etc
Material: steel
wire welded mesh
, stainless steel
welded wire mesh
Surface:galvanized welded wire mesh,hot dip galvanized welded wire mesh,pvc coated welded wire mesh
welded wire mesh
Roll Width available: 3',4',5'
Roll Length available: 25M, 30.5M, 45M
Mesh available: 3/4",1/2",1",1/4",3/8",5/8"
Wire guage available: 14#-23#
Packing: Water Proof Paper, PE bag.


galvanized welded wire mesh panel

1.galvanized welded panel
2.material:high quality low
carbon steel wire
stainless steel wire
3.anti-corrosion,oxidation etc
Galvanized Welded Wire Mesh Panel

Wire Materials:
Mild steel wire, stainless steel wire, galvanized steel wire, hot-dipped zinc plating iron wire.

Process:
Galvanized after weaving or galvanized before weaving.
Finish:
Electric galvanizing, hot-dip zinc plating, stainless steel or PVC coated.
General Use:
Welded Wire Mesh with excellent corrosion resistance and oxidation resistance, is extensively used as fencing, decoration and machinery protection material in agriculture, construction, transport, mine, sports field, lawn and various industrial fields.


Specification List of Welded Wire Mesh
Opening
Wire Diameter<BWG>
In inch
In metric unit(mm)
1/4" x 1/4"
6.4mm x 6.4mm
22,23,24
3/8" x 3/8"
10.6mm x 10.6mm
19,20,21,22
1/2" x 1/2"
12.7mm x 12.7mm
16,17,18,19,20,21,22,23
5/8" x 5/8"
16mm x 16mm
18,19,20,21,
3/4" x 3/4"
19.1mm x 19.1mm
16,17,18,19,20,21
1" x 1/2"
25.4mm x 12.7mm
16,17,18,19,20,21
1-1/2" x 1-1/2"
38mm x 38mm
14,15,16,17,18,19
1" x 2"
25.4mm x 50.8mm
14,15,16
2" x 2"
50.8mm x 50.8mm
12,13,14,15,16
Technical Note:
1,Standard roll length: 30m;width: 0.5m to 1.8m
2,Special sizes available at request
3,Packing: in waterproof paper in rolls. Custom packing available at request

Galvanized Fencing Mesh
Opening
Wire Diameter<BWG>
In inch
In metric unit(mm)
2" x 3"
50mm x 75mm
2.0mm,2.5mm,1.65mm
3" x 3"
75mm x 756mm
2.67mm,2.41mm,2.11mm,1.83mm,1.65mm
2" x 4"
50mm x 100mm
2.11mm,2.5mm
4" x 4"
100mm x 100mm
2.0mm,2.5mm
Technical Note:
1,Standard roll length: 30m;width: 0.5m to 1.8m
2,Special sizes available at request
3,Packing: in waterproof paper in rolls. Custom packing available at request.

PVC Coated Welded Mesh:
Opening
Wire Diameter<BWG>
In inch
In metric unit(mm)
1/2" x 1/2"
12.7mm x 12.7mm
16,17,18,19,20,21
3/4" x 3/4"
19mm x 19mm
16,17,18,19,20,21
1" x 1"
25.4mm x 25.4mm
15,16,17,18,19,20
Technical Note:
1.Standard roll length: 30m;width: 0.5m to 1.2m
2.Special sizes available at request
3.Packing: in waterproof paper in rolls. Custom packing available at request.