1) For single surface weld but double surface forming
2) Material:Carbon Steel, Stainless Steel, Ni-based,Ti-based
3) Any dia.
Standard: AWS
1. Carbon Steel TIG welding wire AWS No.
ER49-1
ER80S-B2
ER80S-B6ER80S-Ni3
2. Stainless steel TIG welding wire AWS No.
ER307
ER307Si
ER308
ER308L
ER308Si
ER308LSi
ER308L-G
ER309
ER309L
ER309Si
ER309LSi
ER309Mo
ER309LMo
ER310
ER316
ER316L
ER316Si
ER316LSi
ER317
ER317L
ER321
ER347
ER385
ER410
ER410NiMo
ER2209
3. single surface weld but double surface forming TIG welding wire No.
TGF308
TGF308L
TGF309
TGF309L
TGF316
TGF316L
TGF321
TGF347
TGF2209
TMX308L
TMX309L
TMX316L
4. Ni-base TIG welding wire AWS No.
ERNi-1
ERNiCr-3
ERNiCrMo-3
5. Ti-based TIG welding wire
Saturday, April 2, 2011
AWS ER70s-6 co2 welding wire DIN SG2
DIN SG2 welding wire ER70s-6
as fast melting rate,high depositing efficiency,stable arc,little spatter,beautiful seam
CO2 ER70s-6 DIN SG2 welding wire:
welding wire has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg,12.5kg and 20kg.
- Packing: cartons lined with plastic spool
as fast melting rate,high depositing efficiency,stable arc,little spatter,beautiful seam
CO2 ER70s-6 DIN SG2 welding wire:
welding wire has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg,12.5kg and 20kg.
- Packing: cartons lined with plastic spool
TIG welding wire
TIG welding wire
GOOD QUALITY and COMPETITIVE PRICE
PROMPT DELIVERY
STABLE and LONG-TERM SUPPLY
TIG welding wire (Stainless Steel Argon Arc Welding Wire)
Grade: 400 series
Standard: GB, JIS, ASTM, AISI
Diameter: 1.6-3.2 mm
Surface: bright
Packing: in plastic box
Advantages: 1. good performance in corrosion resistance makes welding quality higher.
2. It suits to weld thin sheets.
3. the shape of welding seam looks nice.
GOOD QUALITY and COMPETITIVE PRICE
PROMPT DELIVERY
STABLE and LONG-TERM SUPPLY
TIG welding wire (Stainless Steel Argon Arc Welding Wire)
Grade: 400 series
Standard: GB, JIS, ASTM, AISI
Diameter: 1.6-3.2 mm
Surface: bright
Packing: in plastic box
Advantages: 1. good performance in corrosion resistance makes welding quality higher.
2. It suits to weld thin sheets.
3. the shape of welding seam looks nice.
TINNED COPPER CLAD ALUMINUM
TCCA is CCA covered with a layer of tin which featured of the small density of aluminium and the good conductivity of copper.
Tinned copper clad aluminium wire(TCCA)
TCCA is CCA covered with a layer of tin which featured of the small density of aluminium and the good conductivity of copper.
Detailed Product Description:
Certification:
ISO 9001:2000 quality management system
UL Certification
ROHS Authentication
Product:Tinned copper clad aluminium wire(TCCA)
Tinned copper wire(Tinned wire)
Copper clad aluminum wire(CCA)
Enameled copper clad aluminum wire(ECCA)
Enameled aluminum wire(EAL)
Enameled copper wire
Copper clad aluminum magnesium alloy wire(CCAM)
Diameter:Tinned copper clad aluminium wire:0.14-0.80mm
Tinned copper wire:0.10-0.80mm
Copper clad aluminum wire:0.10-8.00mm
Enameled copper clad aluminum wire(ECCA):0.10-5.00mm
Enameled aluminum wire:0.13-6.00mm
Enameled copper wire:0.06-5.00mm
Copper clad aluminum magnesium alloy wire:0.10-2.50mm
Copper percentage in weight is 30%-40%
Core number:one
Shape materials:Round
Elongation:>15%
Tensile strength:>230Mpa
Packing:Carton
Advantages : 1,resistance to oxidation
2,small density of aluminium
3, good conductivity of copper
4, high signal transmission property
5, light weight
6, low production cost
The application:
A.In high signal transmission, it is applied to:
1. Standard Material of Conductor in CATV Coaxial Cable
2. 50 Ohm Radio Frequency Aerial
3. Leaky Cable
4. Data Cable
5. Soft Coaxial Radio Frequency Cable
B.In power transmission and LF signal transmission, it can beapplied to:
Twisted Pair Power Cable Control Cable Building Cotton Covered Wire Busbar & Other Conductors
C.In special electromagnetic wire, it can be applied to:
1.Coils or windings in computers
2. Mobile communication equipments
3. Spaceflight & aviation and military industry instruments
We are the leading manufacturer of ECCA and EAL wire in China.We can provide specific enameled wires according to your specific requirements. At present our output reaches 450-500T everymonth.Trust us, we are the most reliable supplier!
FOR MORE INFORMATION ,please visit our website
Tinned copper clad aluminium wire(TCCA)
TCCA is CCA covered with a layer of tin which featured of the small density of aluminium and the good conductivity of copper.
Detailed Product Description:
Certification:
ISO 9001:2000 quality management system
UL Certification
ROHS Authentication
Product:Tinned copper clad aluminium wire(TCCA)
Tinned copper wire(Tinned wire)
Copper clad aluminum wire(CCA)
Enameled copper clad aluminum wire(ECCA)
Enameled aluminum wire(EAL)
Enameled copper wire
Copper clad aluminum magnesium alloy wire(CCAM)
Diameter:Tinned copper clad aluminium wire:0.14-0.80mm
Tinned copper wire:0.10-0.80mm
Copper clad aluminum wire:0.10-8.00mm
Enameled copper clad aluminum wire(ECCA):0.10-5.00mm
Enameled aluminum wire:0.13-6.00mm
Enameled copper wire:0.06-5.00mm
Copper clad aluminum magnesium alloy wire:0.10-2.50mm
Copper percentage in weight is 30%-40%
Core number:one
Shape materials:Round
Elongation:>15%
Tensile strength:>230Mpa
Packing:Carton
Advantages : 1,resistance to oxidation
2,small density of aluminium
3, good conductivity of copper
4, high signal transmission property
5, light weight
6, low production cost
The application:
A.In high signal transmission, it is applied to:
1. Standard Material of Conductor in CATV Coaxial Cable
2. 50 Ohm Radio Frequency Aerial
3. Leaky Cable
4. Data Cable
5. Soft Coaxial Radio Frequency Cable
B.In power transmission and LF signal transmission, it can beapplied to:
Twisted Pair Power Cable Control Cable Building Cotton Covered Wire Busbar & Other Conductors
C.In special electromagnetic wire, it can be applied to:
1.Coils or windings in computers
2. Mobile communication equipments
3. Spaceflight & aviation and military industry instruments
We are the leading manufacturer of ECCA and EAL wire in China.We can provide specific enameled wires according to your specific requirements. At present our output reaches 450-500T everymonth.Trust us, we are the most reliable supplier!
FOR MORE INFORMATION ,please visit our website
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE//STONE BRIDGE BRAND
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE STONE BRIDGE BRAND
1.model:AWS ER70S-6
2.size 0.6-2.0mm
3.IEI SGS BV ISO CONCAP
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE/STONE BRIDGE BRAND
2Dia:0.8mm 0.9mm 1.0mm 1.6mm 2.0mm
Model Number: AWS ER70S-6 GB ER50-6/ DIN SG2 / BS A18/JIS Y GM12
certificate: ISO IEI SGS BV CIQ
Supplier:Shijiazhuang Shiqiao Electric welding Material Co.,ltd
Brand :stone bridge brand and Hero Brand
Standard:AWS A5.18 ER70S-6
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE/STONE BRIDGE BRAND
ER70s-6 CO2 welding wire
copper coated welding wire
co2 shielded arc WELDING WIRE SAW ER70S-6
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
1.model:AWS ER70S-6
2.size 0.6-2.0mm
3.IEI SGS BV ISO CONCAP
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE/STONE BRIDGE BRAND
2Dia:0.8mm 0.9mm 1.0mm 1.6mm 2.0mm
Model Number: AWS ER70S-6 GB ER50-6/ DIN SG2 / BS A18/JIS Y GM12
certificate: ISO IEI SGS BV CIQ
Supplier:Shijiazhuang Shiqiao Electric welding Material Co.,ltd
Brand :stone bridge brand and Hero Brand
Standard:AWS A5.18 ER70S-6
TIPTOP (CO2) GAS-SHIELDED WELDING WIRE/STONE BRIDGE BRAND
ER70s-6 CO2 welding wire
copper coated welding wire
co2 shielded arc WELDING WIRE SAW ER70S-6
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
TN3 Nitinol Memory Shape Alloy Wire
Nickel-Ti shape memory alloy wire
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
TNC Nitinol Memory Shape Alloy Wire
Nickel-Ti shape memory alloy wire
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
TOP QUALITY WELDING WIRE ER70S-6
CO2 gas shielded ER70S-6 welding wire
Size:0.8-1.6mm
5KG-20KG/Spool
Free samples.
ISO.BV.COC.SGS.IEI.SONCAP CERTIFIED
Co2 gas shielded welding wire/mig welding wire AWS ER70S-6
WELDING WIRE,mig welding wire,co2 welding wire
WELDING WIRE, Mig welding wire,co2 welding wire
Features:
Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application:
low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
CO2 GAS SHIELDED WELDING WIRE
Type
China Natinal Standard (GB)
Internatinal
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temper ature
TensileNum KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltdge Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
Packing: 5kg/15kg/18/20kg per spool with pallet
spool size: D200/270/300 K300
Certificate: ISO 9001:2000
Size:0.8-1.6mm
5KG-20KG/Spool
Free samples.
ISO.BV.COC.SGS.IEI.SONCAP CERTIFIED
Co2 gas shielded welding wire/mig welding wire AWS ER70S-6
WELDING WIRE,mig welding wire,co2 welding wire
WELDING WIRE, Mig welding wire,co2 welding wire
Features:
Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application:
low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
CO2 GAS SHIELDED WELDING WIRE
Type
China Natinal Standard (GB)
Internatinal
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temper ature
TensileNum KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltdge Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
Packing: 5kg/15kg/18/20kg per spool with pallet
spool size: D200/270/300 K300
Certificate: ISO 9001:2000
TOP quality co2/mig Welding Wire AWS ER70S-6 15kg/spool
welding wire:
complete specifications
with high quality and reasonable price.
Certificate: ISO 9001:2000
Welding wire:
Supply good quality, reasonable price co2 welding wire
Features Specifications: WELDING WIRE,mig welding wire,co2 welding wire
Detailed Product Description
Material:CO2 Gas Shielded Welding Wire (AWS ER70S-6) is made from excellent Ho8Mn2SiA steel by drawing, straightening and copper coating..
Features: Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application: low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Packing f: 10kg, 15kg or 20kg packed in plastic spool.
Certificate: ISO 9001:2000
CO2 GAS SHIELDED WELDING WIRE
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temperature
Tensile Num KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltage Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
complete specifications
with high quality and reasonable price.
Certificate: ISO 9001:2000
Welding wire:
Supply good quality, reasonable price co2 welding wire
Features Specifications: WELDING WIRE,mig welding wire,co2 welding wire
Detailed Product Description
Material:CO2 Gas Shielded Welding Wire (AWS ER70S-6) is made from excellent Ho8Mn2SiA steel by drawing, straightening and copper coating..
Features: Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application: low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Packing f: 10kg, 15kg or 20kg packed in plastic spool.
Certificate: ISO 9001:2000
CO2 GAS SHIELDED WELDING WIRE
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temperature
Tensile Num KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltage Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
TOP quality co2/mig gas Welding Wire AWS ER70S-6 15kg/spool
welding wire:
Dia:0.8,1.0,1.2,1.6mm
with high quality,reasonable price.
Free sample
ISO.BV.SGS.SONCAP.COC Certified...
Welding wire AWS ER70S-6:
Shipper: Shijiazhuang Shiqiao electric welding material co.,ltd.
Supply good quality, reasonable price co2 welding wire
Features Specifications: WELDING WIRE,mig welding wire,co2 welding wire
Detailed Product Description
Material: Wire rod ER70S-6 type
Features: Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application: low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Packing f: 10kg, 15kg or 20kg packed in plastic spool.
Certificate: ISO 9001:2000
CO2 GAS SHIELDED WELDING WIRE
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temperature
Tensile Num KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltage Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
Dia:0.8,1.0,1.2,1.6mm
with high quality,reasonable price.
Free sample
ISO.BV.SGS.SONCAP.COC Certified...
Welding wire AWS ER70S-6:
Shipper: Shijiazhuang Shiqiao electric welding material co.,ltd.
Supply good quality, reasonable price co2 welding wire
Features Specifications: WELDING WIRE,mig welding wire,co2 welding wire
Detailed Product Description
Material: Wire rod ER70S-6 type
Features: Stable electric arc, low splashing, high deposition efficiency and good anti pore property, It can be welded automatically or semi-automatical.
Application: low carbon steel and low alloy steel, rolling stock, container, engineering machinery, and pressure container, etc.
Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Packing f: 10kg, 15kg or 20kg packed in plastic spool.
Certificate: ISO 9001:2000
CO2 GAS SHIELDED WELDING WIRE
Type
China National Standard (GB)
International
Standard
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
ER50-6
ER50-6
AWS ER70S-6
0.06-0.15
1.40-1.85
0.80-1.15
≤0.035
≤0.025
≤0.50
Mechanical Properties of Deposited Metal
Tensile Strength Mpa
Yield Strength
Mpa
Elongation
%
Temperature
Tensile Num KAV
≥500
≥420
≥22
-29°C
≥27
Specifications /Reference Electric Current and Voltage Packing Weight
Diameter
0.8
0.9
1.0
1.2
1.6
Current
40 - 140
50 - 200
70 - 250
80 - 350
170 - 450
Voltage
16 - 21
17 - 25
17 - 27
18 - 30
23 - 43
Weight(Kg)
5/15/18
5/15/18
5/15/20
5/15/20
5/15/20
AWS ER70s-6 copper coated welding wire SG2
wire weld
used for welding low carbon alloy steel,widely used in industries of vehicles,bridge-engineering,machine-engineering
AWS ER70s-6CO2 copper coated welding wire SG2
welding has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg,12.5kg and 20kg.
- Packing: cartons lined with plastic spool
Application:
Mainly used for welding low carbon alloy steel,widely used in industries of vehicles,bridge-engineering,machine-engineering,steel structures,shipping manufacture
Mechanical Property:
Joint Strength
(MPA)δ
succumb strength
(MPA) δ0.2
elongation index
δ5%
shock value
Akv
-29 (J)
550
430
30
90
Chemical Composition:
C
Mn
Si
S
P
Cu
Other
0.08%
1.52%
0.92%
0.015%
0.020%
0.2%
≤0.50
Package :
Dia
0.6mm
0.8mm
0.9mm
1.0mm
1.2mm
1.6mm
Current
25-110
40-140
50-200
70-250
80-350
170-450
Voltage
12-19
16-21
17-25
17-27
18-30
23-43
Weight/spool
(KG)
1/5/10
15/20
15/20
15/20
20
20
used for welding low carbon alloy steel,widely used in industries of vehicles,bridge-engineering,machine-engineering
AWS ER70s-6CO2 copper coated welding wire SG2
welding has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg,12.5kg and 20kg.
- Packing: cartons lined with plastic spool
Application:
Mainly used for welding low carbon alloy steel,widely used in industries of vehicles,bridge-engineering,machine-engineering,steel structures,shipping manufacture
Mechanical Property:
Joint Strength
(MPA)δ
succumb strength
(MPA) δ0.2
elongation index
δ5%
shock value
Akv
-29 (J)
550
430
30
90
Chemical Composition:
C
Mn
Si
S
P
Cu
Other
0.08%
1.52%
0.92%
0.015%
0.020%
0.2%
≤0.50
Package :
Dia
0.6mm
0.8mm
0.9mm
1.0mm
1.2mm
1.6mm
Current
25-110
40-140
50-200
70-250
80-350
170-450
Voltage
12-19
16-21
17-25
17-27
18-30
23-43
Weight/spool
(KG)
1/5/10
15/20
15/20
15/20
20
20
TOPS 1.2mm mig welding wire aws er70s-6
mig welding wire aws er70s-6
Diameter:0.8mm,1.0mm,1.2mm,1.6mm
material:mild steel wire
stable feasibility,good welding seams
mig welding wire aws er70s-6,high quality,competitive price
Description:
ER70S-6 is a kind of mild steel copper coated welding wire , suitable for 100% CO2 and Argon & CO2 mixed gas protective welding with stable feasibility , good welding seams , less spatters and excellent welding process properties.
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T 8110 ER50-6 ISO 636-A-W 42 3 W3Sil
AWS A5.18 ER70S-6 ISO 636-B-W 49A 3 W6
BS EN 1668-W 42 3 W3Sil JIS Z3316 YGT50
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV (J)
≥420
≥500
≥22
≥27(-30
°C
)
Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work parts
Diameter:0.8mm,1.0mm,1.2mm,1.6mm
material:mild steel wire
stable feasibility,good welding seams
mig welding wire aws er70s-6,high quality,competitive price
Description:
ER70S-6 is a kind of mild steel copper coated welding wire , suitable for 100% CO2 and Argon & CO2 mixed gas protective welding with stable feasibility , good welding seams , less spatters and excellent welding process properties.
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T 8110 ER50-6 ISO 636-A-W 42 3 W3Sil
AWS A5.18 ER70S-6 ISO 636-B-W 49A 3 W6
BS EN 1668-W 42 3 W3Sil JIS Z3316 YGT50
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV (J)
≥420
≥500
≥22
≥27(-30
°C
)
Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work parts
Tank packed welding wire/ ER70S-6
1. Series:Co2 Gas Shielded Welding Wire and welding electrode
2. Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm
Tank packed welding wire/ ER70S-6
Model series:
ER70S-6, ER70S-4, ER80S, ER90S, ER100S
Specification:
Φ0.8mm Φ0.9mm Φ1.0mm Φ1.2mm Φ1.6mm Φ2.0mm
Packing form:
250kg packed in tank or drum
Chemical components of solder wire(%):
C Mn Si S P Cu
0.06~0.15 1.40~1.85 0.80~1.15 ≤0.035 ≤0.025 ≤0.50
Mechanical properties of deposited metal:
Tensile strengthσb(MPa)≥500
Yield strengthδ0.2(MPa)≥420
Elongationδ5(%)≥22
Impact V-Notch Akv(-29CJ) ≥27
Application:
AWS ER70S-6 solder wire is suitable for CO2 shielded welding of low carbon steel and low alloy steel,particularly it is suitable for welding rolling stock,container,engineering machinery,and pressure container,etc.
Features:
Stable electric arc,low splashing,high deposition efficiency and good anti pore property,It can carry out welding at all positions.
2. Specification: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm
Tank packed welding wire/ ER70S-6
Model series:
ER70S-6, ER70S-4, ER80S, ER90S, ER100S
Specification:
Φ0.8mm Φ0.9mm Φ1.0mm Φ1.2mm Φ1.6mm Φ2.0mm
Packing form:
250kg packed in tank or drum
Chemical components of solder wire(%):
C Mn Si S P Cu
0.06~0.15 1.40~1.85 0.80~1.15 ≤0.035 ≤0.025 ≤0.50
Mechanical properties of deposited metal:
Tensile strengthσb(MPa)≥500
Yield strengthδ0.2(MPa)≥420
Elongationδ5(%)≥22
Impact V-Notch Akv(-29CJ) ≥27
Application:
AWS ER70S-6 solder wire is suitable for CO2 shielded welding of low carbon steel and low alloy steel,particularly it is suitable for welding rolling stock,container,engineering machinery,and pressure container,etc.
Features:
Stable electric arc,low splashing,high deposition efficiency and good anti pore property,It can carry out welding at all positions.
Tel Saldim ER70S-6
1,welding wire Application building,ships,briges,ect
2,good weldability
3,low residue
4,low splash
5,high reliability
1,welding wire AWS A5.18 ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
2,Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
3,
Packaging
Wire Size
Spool Size
Net Weight
φ0.8~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties or Deposited Metal
Yield strengthσ
0.2
(Mpa)
Tensile strengthσ
b
(Mpa)
Elongationδ
5
(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil,rust,water etc from the work parts
4,0.9kg, 4.5kg, 5kg, 15kg, 20kg, 27kg plastic spool layer wind
5,15kg, 20kg iron spool layer wind
6,100kg, 250kg, 350kg drum packing
2,good weldability
3,low residue
4,low splash
5,high reliability
1,welding wire AWS A5.18 ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
2,Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
3,
Packaging
Wire Size
Spool Size
Net Weight
φ0.8~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties or Deposited Metal
Yield strengthσ
0.2
(Mpa)
Tensile strengthσ
b
(Mpa)
Elongationδ
5
(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil,rust,water etc from the work parts
4,0.9kg, 4.5kg, 5kg, 15kg, 20kg, 27kg plastic spool layer wind
5,15kg, 20kg iron spool layer wind
6,100kg, 250kg, 350kg drum packing
The Geothermy Wire Mesh
The Geothermy Wire Mesh
1 size: usually is 1m*2m
2 wire diameter: 2.0mm, 2.5mm, 3.00mm
3 mesh:0.1m*0.1m-0.2m*0.2m
The Geothermy Wire Mesh
This is kind of special wire mesh panel for constructional slab heating with firm spot welding,reasonable structure and smooth opening. This kind of welded wire sheets are mainly used for installation and fixing of heating pipes or cables; strengthening heat isolation sheet materials;and/or increasing the load-bearing of the surface floor.
specification (M)
Wire diameter(mm)
Mesh(mm)
Net Weight(kg)
1 x 2
2.0
100x100
1.06
2.0
150x150
0.06
2.0
200x200
0.56
2.5
100x100
1.65
2.5
150x150
1.04
2.5
200x200
0.88
3.0
100x100
2.38
3.0
150x150
1.5
3.0
200x200
1.27
1 size: usually is 1m*2m
2 wire diameter: 2.0mm, 2.5mm, 3.00mm
3 mesh:0.1m*0.1m-0.2m*0.2m
The Geothermy Wire Mesh
This is kind of special wire mesh panel for constructional slab heating with firm spot welding,reasonable structure and smooth opening. This kind of welded wire sheets are mainly used for installation and fixing of heating pipes or cables; strengthening heat isolation sheet materials;and/or increasing the load-bearing of the surface floor.
specification (M)
Wire diameter(mm)
Mesh(mm)
Net Weight(kg)
1 x 2
2.0
100x100
1.06
2.0
150x150
0.06
2.0
200x200
0.56
2.5
100x100
1.65
2.5
150x150
1.04
2.5
200x200
0.88
3.0
100x100
2.38
3.0
150x150
1.5
3.0
200x200
1.27
The complete production line for S.S.&M.S& F.C.W wire
we are the professional manufacturer of the complete fluc core wire and mild steel wire production line located in Tianjin, the
we are the professional manufacturer of the complete fluc core wire and mild steel wire production line located in Tianjin, the second largest port of China. we have exported to India, Canada, Brazil ,Russia and so on.
We not only supply machines but also supply best after sales service.We will send our technician to help the buyer to install the machine and commission the machines after all machines arrive at the buyer's plant.
6/7/9-head wire drawing machine(XZ-YL-6/450)
Main technical parameter:
1.Wire material: Flux cored wire
2.Diameter of inlet wire: 5.1mm~4.1mm
3.Finished wire spec: 2.25mm~2.8mm(semi-finished flux cored wire)
4.Max inlet wire stength:700Mpa
5.Max. diameter of inlet wire: φ4.8mm
6.Min. diameter of outgoing wire: φ2.8mm
7.Max drawing speed: ≤9m/s
8.Water consumption and pressure: 3m
3
/h water pressure ≥0.3Mpa
9.Air consumption and pressure: 0.6m
3
/h Air pressure≥ 0.4Mpa
10.Motor
Host machine: 15kwAC variable frequency motor (the first block is 15kw, others each block is 11kw)
Wire coiler: 15kwAC variable frequency motor SIEMENS
Noise of one machine: ≤81db
we are the professional manufacturer of the complete fluc core wire and mild steel wire production line located in Tianjin, the second largest port of China. we have exported to India, Canada, Brazil ,Russia and so on.
We not only supply machines but also supply best after sales service.We will send our technician to help the buyer to install the machine and commission the machines after all machines arrive at the buyer's plant.
6/7/9-head wire drawing machine(XZ-YL-6/450)
Main technical parameter:
1.Wire material: Flux cored wire
2.Diameter of inlet wire: 5.1mm~4.1mm
3.Finished wire spec: 2.25mm~2.8mm(semi-finished flux cored wire)
4.Max inlet wire stength:700Mpa
5.Max. diameter of inlet wire: φ4.8mm
6.Min. diameter of outgoing wire: φ2.8mm
7.Max drawing speed: ≤9m/s
8.Water consumption and pressure: 3m
3
/h water pressure ≥0.3Mpa
9.Air consumption and pressure: 0.6m
3
/h Air pressure≥ 0.4Mpa
10.Motor
Host machine: 15kwAC variable frequency motor (the first block is 15kw, others each block is 11kw)
Wire coiler: 15kwAC variable frequency motor SIEMENS
Noise of one machine: ≤81db
Thermal Spray Coating Wires
High wear and corrosion resistance thermal spray coating wire
The coating has excellent wear resistant and bonding strength, low shrinkage and expansion coefficient, so it may make up thick coating, excellent properties of self-gumminess, also be used to bottom coating, substituted aluminum bronze, non-toxic, efficient, low-cost.
Strength HRC Diameter
>52Mpa 35-39 2.0
The coating has excellent wear resistant and bonding strength, low shrinkage and expansion coefficient, so it may make up thick coating, excellent properties of self-gumminess, also be used to bottom coating, substituted aluminum bronze, non-toxic, efficient, low-cost.
Strength HRC Diameter
>52Mpa 35-39 2.0
Thermal Spray Coating Wires
High wear and corrosion resistance thermal spray coating wire
High-temperature and erosion resistance cermet thermal spray coating wire, excellent properties of thermal shock resistance and high-temperature erosion resistance. Preventing four tubes explosion of boiler.
Strength HRC Diameter
>50Mpa 50-57 2.0
High-temperature and erosion resistance cermet thermal spray coating wire, excellent properties of thermal shock resistance and high-temperature erosion resistance. Preventing four tubes explosion of boiler.
Strength HRC Diameter
>50Mpa 50-57 2.0
AWS ER70s-6 copper coating welding wire
copper coating welding wire AWS ER70s-6
have depositing speed and high efficiency,stable arc,little splash,good welding seam
co2 copper coating welding wire AWS ER70s-6 factory
AWS ER70s-6 welding wire
diameter:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm
net weight:5kg,15kg,20kg
this ER70s-6 co2 gas shielded copper coated welding wire has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure,vehicle,bridge,container,construction machinery ,boilers and construction etc.
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
- Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg and 20kg.
- Packing of welding wire:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work parts
have depositing speed and high efficiency,stable arc,little splash,good welding seam
co2 copper coating welding wire AWS ER70s-6 factory
AWS ER70s-6 welding wire
diameter:0.8mm,0.9mm,1.0mm,1.2mm,1.6mm
net weight:5kg,15kg,20kg
this ER70s-6 co2 gas shielded copper coated welding wire has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure,vehicle,bridge,container,construction machinery ,boilers and construction etc.
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
- Chemical composition: C 0.06-0.15, Mn 1.40-1.85, Si 0.80-1.15, P <=0.025, S <=0.035, Cu <=0.35, Ni <=0.30, Cr <=0.20
- Weight of spool : 5kg,15kg and 20kg.
- Packing of welding wire:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size
(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just
when welding to avoid the wire rust.
Before welding please clean out the
oil,rust,water etc from the work parts
Thermal Spray Coating Wires
High wear and corrosion resistance thermal spray coating wire
Coating’s porosity is 3.9% and few oxides which is used for wear resistant coating of CFB and Fan blade. The coating has excellent erosion and abrasion resistant.Bonding
Strength HRC Diameter
>50Mpa 65-70 2.0
Coating’s porosity is 3.9% and few oxides which is used for wear resistant coating of CFB and Fan blade. The coating has excellent erosion and abrasion resistant.Bonding
Strength HRC Diameter
>50Mpa 65-70 2.0
Thermal Spray Coating Wires
High wear and corrosion resistance thermal spray coating wire
The coating has excellent corrosion and wear resistant, especially in the oxidative medium. You must choice suitable sealing reagent. It can be used for corrosion resistant coating which should not be too thick, because of large coefficient of linear expansion.
Strength HRC Diameter
>51Mpa 40-45 2.0
The coating has excellent corrosion and wear resistant, especially in the oxidative medium. You must choice suitable sealing reagent. It can be used for corrosion resistant coating which should not be too thick, because of large coefficient of linear expansion.
Strength HRC Diameter
>51Mpa 40-45 2.0
Thinner dia.Lead-free solder wire( 2.0mm SnCu3.0 )
Lead-free solder wire is with:
1.active rosin cored flux from 1.7% to 3.3%
2.strong early wetting rate,good durative.
Shape & tolerance:lead-free solder wire(welding wire)
Appearance: lucent, no dirt on surface
Weight: 15KG/box or so
Features: made of pure tin and pure copper from Yunnan Tin Industry Co., Ltd., advanced processing with high purity .
Purpose: leadless soldering in high temperature for electronics industry
Physical properties:
(1) Liquid temperature: about 227
(2) Specific gravity: about 7.4
Alloy composition:(wave soldering alloy)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
97
3.0±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Lead-free solder wire is suitable for the static dip soldering and welding wire soldering and hand-holding dip slodering.Solder wire is widely used on electronic industry.
1.active rosin cored flux from 1.7% to 3.3%
2.strong early wetting rate,good durative.
Shape & tolerance:lead-free solder wire(welding wire)
Appearance: lucent, no dirt on surface
Weight: 15KG/box or so
Features: made of pure tin and pure copper from Yunnan Tin Industry Co., Ltd., advanced processing with high purity .
Purpose: leadless soldering in high temperature for electronics industry
Physical properties:
(1) Liquid temperature: about 227
(2) Specific gravity: about 7.4
Alloy composition:(wave soldering alloy)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
97
3.0±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Lead-free solder wire is suitable for the static dip soldering and welding wire soldering and hand-holding dip slodering.Solder wire is widely used on electronic industry.
Thinner diameter lead-free solder wire(SnAg3.0Cu 0.13mm )
Lead-free solder wire is with:
1.active rosin cored flux from 1.8% to3.3%.
2.strong early wetting rate,good durative.
Shape & tolerance:lead-free solder wire(tin silder wire)
Appearance: lucent, no dirt on surface
Weight: 15KG/box or so
Features: made of pure tin and pure copper from Yunnan Tin Industry Co., Ltd., advanced processing with high purity .
Purpose: leadless soldering in high temperature for electronics industry
Physical properties:
(1) Liquid temperature: about 227
(2) Specific gravity: about 7.4
Alloy composition:(thinner diameter solder wire)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
99.3
0.7±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Lead-free solder wire is suitable for the static dip soldering and welding wire soldering and hand-holding dip slodering.Solder wire is widely used on electronic industry.
1.active rosin cored flux from 1.8% to3.3%.
2.strong early wetting rate,good durative.
Shape & tolerance:lead-free solder wire(tin silder wire)
Appearance: lucent, no dirt on surface
Weight: 15KG/box or so
Features: made of pure tin and pure copper from Yunnan Tin Industry Co., Ltd., advanced processing with high purity .
Purpose: leadless soldering in high temperature for electronics industry
Physical properties:
(1) Liquid temperature: about 227
(2) Specific gravity: about 7.4
Alloy composition:(thinner diameter solder wire)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
99.3
0.7±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Lead-free solder wire is suitable for the static dip soldering and welding wire soldering and hand-holding dip slodering.Solder wire is widely used on electronic industry.
Three roller Drawing Machine
The Three roller drawing machine applys to with lead and lead-free solder wire rom 5mm-0.8mm
Machine structure
The main part of the wire drawing machine was joint by steel plate steel, and driven by double chain, spray hard chrome on the roller to improve the rigidity and the roughness of the surface. Cool and lubricate the drawing part by steeping, with cover to prevent the cooling liquid splash out. Adopt 15KW motor with inverter control to ensure the stable speed.
Technical parameter
Item Unit Spec
1, Inlet wire mm 5
2, Outlet wire mm 0.8
3, Max speed m/min 220
4, Dies no. pcs 43
5, Speed fix wheel diameter mm 160
6, Power KW 15
7, Outer dimension mm(L*W*H) 2140x885x1100
8,
Machine weight T 1
Machine Operation
Input Lubricating oil and arrange drawing die before down lead, and then draw the wire through the dies according to the tightness of each dies and machine work condition. Make two circles around the roller for the strong pull, one circle for weak pull; (Generally, big diameter wire needs strong pull while small diameter wire needs weak pull. The operator can judge according to the operation.) Finally, put the wire through the wire press wheel and out-let pipeline, then ready to draw the wire.
Safety precautions
1)
Keep the lubricant temperature lower than 50°C, or it will affect the heat giving out.
2)
Electrical connections must be properly grounded
3)
Lubricant all the running parts every two weeks.
4)
If there’s badly shaking or swing of the roller, please check the fixing nut of the roller to ensure it does no damage to the machine by friction between the roller & axis.
5)
If there’s any decrease of the power or slipping, disassembly the back cover to check whether the belt is tight enough and screw the fixing nut tight to adjust the belt.
6)
If there’s exceptional noise during the running, open the cover and check whether there’s shift in the drive chain wheel and screw tight the fixing nut.
7)
Cleaning the dies every shift with diesel oil or kerosene.
Roll bearings list
Serial No.
Position
Bearing type
Qty
1
(1.2)Principal axis
NJ312E
4pcs
2
(3.4)Principal axis
6312-Z
4pcs
3
Speed fix axis
6206-Z
2pcs
4
Wire outlet axis
6206-Z
2pcs
5
Wire press wheel
6003
2pcs
Maintenance
Machine under normal running; the bearings can be change every year and change the wire press wheel according to the abrasion. Lubricate the bearings every shift, avoid the lubricant splash to the painting surface of the machine during the drawing procedure to affect machine outlook. Running the new machine for full charge after one week, or it will affect the life span of the machine.
Machine structure
The main part of the wire drawing machine was joint by steel plate steel, and driven by double chain, spray hard chrome on the roller to improve the rigidity and the roughness of the surface. Cool and lubricate the drawing part by steeping, with cover to prevent the cooling liquid splash out. Adopt 15KW motor with inverter control to ensure the stable speed.
Technical parameter
Item Unit Spec
1, Inlet wire mm 5
2, Outlet wire mm 0.8
3, Max speed m/min 220
4, Dies no. pcs 43
5, Speed fix wheel diameter mm 160
6, Power KW 15
7, Outer dimension mm(L*W*H) 2140x885x1100
8,
Machine weight T 1
Machine Operation
Input Lubricating oil and arrange drawing die before down lead, and then draw the wire through the dies according to the tightness of each dies and machine work condition. Make two circles around the roller for the strong pull, one circle for weak pull; (Generally, big diameter wire needs strong pull while small diameter wire needs weak pull. The operator can judge according to the operation.) Finally, put the wire through the wire press wheel and out-let pipeline, then ready to draw the wire.
Safety precautions
1)
Keep the lubricant temperature lower than 50°C, or it will affect the heat giving out.
2)
Electrical connections must be properly grounded
3)
Lubricant all the running parts every two weeks.
4)
If there’s badly shaking or swing of the roller, please check the fixing nut of the roller to ensure it does no damage to the machine by friction between the roller & axis.
5)
If there’s any decrease of the power or slipping, disassembly the back cover to check whether the belt is tight enough and screw the fixing nut tight to adjust the belt.
6)
If there’s exceptional noise during the running, open the cover and check whether there’s shift in the drive chain wheel and screw tight the fixing nut.
7)
Cleaning the dies every shift with diesel oil or kerosene.
Roll bearings list
Serial No.
Position
Bearing type
Qty
1
(1.2)Principal axis
NJ312E
4pcs
2
(3.4)Principal axis
6312-Z
4pcs
3
Speed fix axis
6206-Z
2pcs
4
Wire outlet axis
6206-Z
2pcs
5
Wire press wheel
6003
2pcs
Maintenance
Machine under normal running; the bearings can be change every year and change the wire press wheel according to the abrasion. Lubricate the bearings every shift, avoid the lubricant splash to the painting surface of the machine during the drawing procedure to affect machine outlook. Running the new machine for full charge after one week, or it will affect the life span of the machine.
TiNi-SS Shape Memory Alloy Spring Wire
Nickel-Ti shape memory alloy wire
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
TiNi-SS Shape Memory Alloy Wire
Nickel-Ti shape memory alloy wire
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
TiNi-SS Shape Memory Alloy Wires
Nickel-Ti shape memory alloy wire
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Dia. 0.035-6.8mm ASTM F2063
We have superior material, advanced equipment and Test Report
1. Name: Superelastic Nickel Titanium Shape Memory Alloy Wires
2. Grade: TiNi-SS, TN3 , TNC
3. Specification: 0.035-6.5mm
4. Shape: Straight or in coils
5. Application: wire drawing , weaving soft tube or wire mesh, filter products , steel- spring wire, widely in antenna,telecommunications,mobile phone, machine parts, medical apparatus , aerospace, electrical power industries .
6. physical property
Density (g/cm^3)
6.45
Melting point (°C )
1240-1310
Specific heat capacity( kJ/(kg·°C)
0.46
Coefficient of thermal conductivity
(W·m-1·K-1)
10
Resistivity (10-6 Ω·m)
80
Expansion coefficient (10-6 Ω·K-1 )
10.4
Elastic modulus (GPa)
40-80
HV
180-200 (low-temperature metallography)
200-350 (high-temperature metallography)
Tensile strength (MPa)
700-1100
Yield strength
50-200 (low-temperature metallography)
100-600 (high-temperature metallography)
Elongation δ %
20-60
phase transition temperature (Af / °C)
-10-100
Recovery response variable %
8, 6, 2 , <0.5
Utmost service temperature (°C )
Af +60, 250
Maximum recovery stress (Mpa)
680
7.
Alloy
Chemical
composition
A
f
(Fully annealed)
Min. elongation to failure [%]
Max. Residual
elongation
after 6%
strain [%]
Main Applications
Specifications
Superelastic
Ni-Ti alloy
TiNi-SS
Ti-50.8at%
-5°C ± 5°C.
10
0.1
Eyeglass Frames, Cellular Phone Antennae, Bra Underwire
Q/XB1516.2
Q/XB1516.2
TN3
TNC
TiNiVAl
TiNiCr
-40°C ~50°C
10
0.1
Body temperature
Ni-Ti alloy
TiNi-YY
Ti-50.7at%Ni
Functional Af=33 ± 3
15
0.1
Implantable devices,Bone staples
Vascular Stents
ASTM 2063
Ti-Ni-01
55.6~55.8 wt%Ni
20 - 40
15
0.1
Guide wires, Stents
Orthodontic Arches
Q/XB1516.1
High temperature Ni-Ti alloy
Ti-Ni-02
54.8~55.5wt%Ni
45 - 95
10
0.1
Implantable active devices, Surgical tools, Thermostats Coffeepots
Q/XB1516.1
8. Service
a. Customers can know thier order status from our web
b. We have the Delay Shipment Recovering Fund, which allows us transport the products on time
c. We promise we'll replace the materials for the same at our cost
d. Test:Provide Bao Ti Center Physical and Chemical Test Report or Northwest Institute For Non -ferrous Metal Research Test Report.
Tig ER70S-6 welding wire
1.Diameter: 0.6-1.6mm;
2.Packing: 25kgs spools,250 drum;
3.good quality and best price
CO2 gas-shielded flux cored welding wire
E71T-1 welding wire is a kind of welding technology developed in the 1950s. During the 40 years or so, it has been developed as a kind of important melt welding method and widely applied to all kinds of fields like automotive industry, construction machinery production, shipbuilding, metallurgical equipment production, bridges, civil works, petrochemical industry, production of pressure vessels of boilers, locomotive vehicles, etc.
At present, the production and application of CO2 gas-shielded welding wire have been developing rapidly. It has accounted for 40-50% in welding materials in some industrialized countries. In china, it has been popularized in many departments, and gradually it is partly replacing manual arc welding with electrodes gradually. Some of its characteristics are as follows,
1. Low welding costs.
2. High productivity and low electricity consumption.
3. Easy to operate. All-position welding.
4. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
5. Little deformation after welding.
6. Wide applicability. Suitable for welding thin, medium and thick plates.
Introduction Strong resistance to surface scales and oil stains on the base metal. It has low blowhole sensitivity.
Uses: 1. Used for welding all kinds of 500MPa structural steel parts.
2.Used for welding all kinds of 500MPa plates and pipes.
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
0.06~0.15
1.4~1.85
0.8~1.15
≤0.035
≤0.025
≤0.50
Examples of Chemical Composition of Deposited Metal (%)
C
Mn
Si
S
P
Cu
0.07
1.27
0.76
0.014
0.015
0.15
Mechanical Properties of Deposited Metal
Test Item
Rm(MPa)
ReLRp0.2(Mpa)
A(%)
KV2(J)
Guarantee Value
≥500
≥420
≥22
≥27(-30)
General Result
558
472
27
98
Reference Current (DC+)
Wire Size(mm) Welding Current(A) CO2 Flow Rate(L/min)
φ0.8 50~100 15
φ1.0 50~220 15~20
φ1.2 80~350 15~25
φ1.6 170~550
2.Packing: 25kgs spools,250 drum;
3.good quality and best price
CO2 gas-shielded flux cored welding wire
E71T-1 welding wire is a kind of welding technology developed in the 1950s. During the 40 years or so, it has been developed as a kind of important melt welding method and widely applied to all kinds of fields like automotive industry, construction machinery production, shipbuilding, metallurgical equipment production, bridges, civil works, petrochemical industry, production of pressure vessels of boilers, locomotive vehicles, etc.
At present, the production and application of CO2 gas-shielded welding wire have been developing rapidly. It has accounted for 40-50% in welding materials in some industrialized countries. In china, it has been popularized in many departments, and gradually it is partly replacing manual arc welding with electrodes gradually. Some of its characteristics are as follows,
1. Low welding costs.
2. High productivity and low electricity consumption.
3. Easy to operate. All-position welding.
4. Very low hydrogen content in the weld and lower nitrogen content. Excellent crack-resistance.
5. Little deformation after welding.
6. Wide applicability. Suitable for welding thin, medium and thick plates.
Introduction Strong resistance to surface scales and oil stains on the base metal. It has low blowhole sensitivity.
Uses: 1. Used for welding all kinds of 500MPa structural steel parts.
2.Used for welding all kinds of 500MPa plates and pipes.
Chemical Composition of Welding Wire(%)
C
Mn
Si
S
P
Cu
0.06~0.15
1.4~1.85
0.8~1.15
≤0.035
≤0.025
≤0.50
Examples of Chemical Composition of Deposited Metal (%)
C
Mn
Si
S
P
Cu
0.07
1.27
0.76
0.014
0.015
0.15
Mechanical Properties of Deposited Metal
Test Item
Rm(MPa)
ReLRp0.2(Mpa)
A(%)
KV2(J)
Guarantee Value
≥500
≥420
≥22
≥27(-30)
General Result
558
472
27
98
Reference Current (DC+)
Wire Size(mm) Welding Current(A) CO2 Flow Rate(L/min)
φ0.8 50~100 15
φ1.0 50~220 15~20
φ1.2 80~350 15~25
φ1.6 170~550
Friday, April 1, 2011
Tig Stainless Steel Welding Wire
Tig Stainless Steel Welding Wire
MIG and TIG wire
bright and 1/2 hard,soft wire
MIG diameter:0.6mm-2.0mm
TIG diameter:1.0
Tig Stainless Steel Welding Wire
You can have a look at below. Any questions, please let me know.
Grade
YB/T
Chemical composition Wt%
C
Mn
Si
Cr
Ni
Mo
others
ER410 AT-H1Cr13
H1Cr13
≤0.12
≤0.60
≤0.50
11.5-13.5
≤0.60
≤0.75
Cu≤0.75
H2Cr13
H2Cr13
0.13-0.21
≤0.60
≤0.60
12.0-14.0
≤0.60
≤0.75
Cu≤0.75
ER430
H1Cr17
≤0.10
≤0.60
≤0.50
15.5-17.0
≤0.60
≤0.75
Cu≤0.75
ER308L
H00Cr21Ni10
≤0.030
1.0-2.5
≤0.60
19.5-22.0
9.0-11.0
≤0.75
Cu≤0.75
ER347L
≤0.030
1.0-2.5
≤0.60
19.0-21.5
9.0-11.0
Nb=10×C~1.0
ER316L
H00Cr19Ni12Mo2
≤0.030
1.0-2.5
≤0.60
18.0-20.0
11.0-14.0
2.0-3.0
Cu≤0.75
ER00Cr18Ni12Mo2N
≤0.030
1.0-2.5
≤0.60
17.0-20.0
11.0-14.0
2.0-2.5
N=0.08-0.13
ER316LCu
H00Cr19Ni12Mo2Cu2
≤0.03
1.0-2.5
≤0.70
17.0-20.0
12.0-16.0
2.0-3.0
Cu=1.0-2.0
ER309L
≤0.03
1.0-2.5
≤0.60
23.0-25.0
12.0-14.0
≤0.75
Cu≤0.75
ER309LNb
≤0.030
1.0-2.5
≤0.60
23.0-25.0
12.0-14.0
≤0.75
Nb×C~1.0
ER309LMo
≤0.030
1.0-2.5
≤0.60
22.0-25.0
12.0-15.0
2.0-3.0
Cu≤0.75
ER310
H1Cr26Ni21
0.08-0.15
1.0-2.5
0.30-.65
25.0-28.0
20.0-22.5
≤0.75
Cu≤0.75
ER385L
≤0.025
1.0-2.5
≤0.60
19.5-21.5
24.0-26.0
4.2-5.2
Cu=1.2-2.0
ER00Cr25Ni22Mn4Mo2N
≤0.020
4.0-6.0
≤0.20
24.0-26.0
21.0-23.0
1.9-2.3
Cu=0.10-0.15 N=0.1-0.2
ER00Cr22Ni8Mo3N
≤0.03
1.0-2.0
≤0.70
21.0-23.0
7.0-9.0
2.5-3.5
Cu=0.10-0.18 N=0.1-0.2
ER00Cr25Ni8MoN
≤0.03
1.0-2.5
≤0.50
24.0-26.0
7.5-9.5
1.0-2.0
Cu=0.2-0.5 N=0.13-0.20
ER4Cr25Ni20
0.35-0.45
≤1.00
≤0.70
23.0-26.0
20.0-22.0
≤0.75
ER4Cr25Ni35Nb
0.35-0.45
≤1.00
≤0.70
23.0-26.0
32.0-37.0
≤0.75
Nb=0.4-1.0
ERCr28Ni48W5
0.10-0.40
≤2.0
≤1.50
26.0-29.0
46.0-50.0
≤0.75
W=4.0-6.0
MIG and TIG wire
bright and 1/2 hard,soft wire
MIG diameter:0.6mm-2.0mm
TIG diameter:1.0
Tig Stainless Steel Welding Wire
You can have a look at below. Any questions, please let me know.
Grade
YB/T
Chemical composition Wt%
C
Mn
Si
Cr
Ni
Mo
others
ER410 AT-H1Cr13
H1Cr13
≤0.12
≤0.60
≤0.50
11.5-13.5
≤0.60
≤0.75
Cu≤0.75
H2Cr13
H2Cr13
0.13-0.21
≤0.60
≤0.60
12.0-14.0
≤0.60
≤0.75
Cu≤0.75
ER430
H1Cr17
≤0.10
≤0.60
≤0.50
15.5-17.0
≤0.60
≤0.75
Cu≤0.75
ER308L
H00Cr21Ni10
≤0.030
1.0-2.5
≤0.60
19.5-22.0
9.0-11.0
≤0.75
Cu≤0.75
ER347L
≤0.030
1.0-2.5
≤0.60
19.0-21.5
9.0-11.0
Nb=10×C~1.0
ER316L
H00Cr19Ni12Mo2
≤0.030
1.0-2.5
≤0.60
18.0-20.0
11.0-14.0
2.0-3.0
Cu≤0.75
ER00Cr18Ni12Mo2N
≤0.030
1.0-2.5
≤0.60
17.0-20.0
11.0-14.0
2.0-2.5
N=0.08-0.13
ER316LCu
H00Cr19Ni12Mo2Cu2
≤0.03
1.0-2.5
≤0.70
17.0-20.0
12.0-16.0
2.0-3.0
Cu=1.0-2.0
ER309L
≤0.03
1.0-2.5
≤0.60
23.0-25.0
12.0-14.0
≤0.75
Cu≤0.75
ER309LNb
≤0.030
1.0-2.5
≤0.60
23.0-25.0
12.0-14.0
≤0.75
Nb×C~1.0
ER309LMo
≤0.030
1.0-2.5
≤0.60
22.0-25.0
12.0-15.0
2.0-3.0
Cu≤0.75
ER310
H1Cr26Ni21
0.08-0.15
1.0-2.5
0.30-.65
25.0-28.0
20.0-22.5
≤0.75
Cu≤0.75
ER385L
≤0.025
1.0-2.5
≤0.60
19.5-21.5
24.0-26.0
4.2-5.2
Cu=1.2-2.0
ER00Cr25Ni22Mn4Mo2N
≤0.020
4.0-6.0
≤0.20
24.0-26.0
21.0-23.0
1.9-2.3
Cu=0.10-0.15 N=0.1-0.2
ER00Cr22Ni8Mo3N
≤0.03
1.0-2.0
≤0.70
21.0-23.0
7.0-9.0
2.5-3.5
Cu=0.10-0.18 N=0.1-0.2
ER00Cr25Ni8MoN
≤0.03
1.0-2.5
≤0.50
24.0-26.0
7.5-9.5
1.0-2.0
Cu=0.2-0.5 N=0.13-0.20
ER4Cr25Ni20
0.35-0.45
≤1.00
≤0.70
23.0-26.0
20.0-22.0
≤0.75
ER4Cr25Ni35Nb
0.35-0.45
≤1.00
≤0.70
23.0-26.0
32.0-37.0
≤0.75
Nb=0.4-1.0
ERCr28Ni48W5
0.10-0.40
≤2.0
≤1.50
26.0-29.0
46.0-50.0
≤0.75
W=4.0-6.0
AWS ER70s-6 welding wire
Our CO2 welding wire offers excellent welding performance and mechanical performance, stable electric arc, few splatter, good we
CO2 gas-shield welding wireER70s-6 has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
- Weight of spool : 5kg,15kg and 20kg.
- Packing: cartons lined with plastic spool
CO2 gas-shield welding wireER70s-6 has excellent mechanical performance such as depositing speed and high efficiency, stable arc, little splash , good welding seam. This series of welding wires are suitable for the low carbon steel and low alloy structure, vehicle ,bridge ,container ,construction machinery ,boilers and construction etc.
- AWS : ER70S-6
- Diameter : 0.8mm,0.9mm, 1.0mm, 1.2mm,1.6mm
- Weight of spool : 5kg,15kg and 20kg.
- Packing: cartons lined with plastic spool
Tig Stainless Steel Welding Wire
Tig Stainless Steel Welding Wire
1. Good quality
2. Competitive price
3. Professional
Tig Stainless Steel Welding Wire
series:ER304,ER308,ER308L,ER309,ER309L,ER316,ER316L,ER410,ER420,ER430etc.
Diameter:0.6-2.0mm
Type:1)MIG/MAG automatic welding wire(plastic spool tight-packing,20kg/spool,15kg/spool)
2)TIG Argon arc welding wire (packing in drums,1m/line,5kg/drum,10kg/drum)
/Stainless Steel TIG MIG Wire
Brand
(mm)
Diameter
Shielding Gas
Chemical Composition of Deposited Metal(%)
C
Si
Mn
P
S
Cr
Ni
Mo
Cu
ER308
0.6-4.0
Ar+0.5-2%CO2
0.08
0.3-0.65
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER308L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER308LSI
0.6-4.0
Ar+0.5-2%CO2
0.03
0.65-1.0
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER309
0.6-4.0
Ar+0.5-2%CO2
0.12
0.3-0.65
1.0-2.5
0.03
0.03
23.0-25.0
12.0-14.0
0.75
0.75
ER309L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
23.0-25.0
12.0-14.0
0.75
0.75
ER310
0.6-4.0
Ar+0.5-2%CO2
0.08-0.15
03-0.65
1.0-2.5
0.03
0.03
25.0-28.0
20.0-22.5
0.75
0.75
ER312
0.6-4.0
Ar+0.5-2%CO2
0.15
0.3-0.62
1.0-2.5
0.03
0.03
28.0-32.0
8.0-10.5
0.75
0.75
ER316
0.6-4.0
Ar+0.5-2%CO2
0.08
0.3-0.65
1.0-2.5
0.03
0.03
18.0-20.0
11.0-14.0
2.0-3.0
0.75
ER316L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
18.0-20.0
11.0-14.0
2.0-3.0
0.75
ER316LSI
0.6-4.0
Ar+0.5-2%CO2
0.03
0.65-1.0
1.0-2.5
0.03
0.03
18.0-20.0
11.4-14.0
2.0-3.0
0.75
ER410
0.6-4.0
Ar+0.5-2%CO2
0.12
0.5
0.6
0.03
0.03
11.5-13.5
0.6
0.75
0.75
ER430
0.6-4.0
Ar+0.5-2%CO2
0.1
0.5
0.6
0.03
0.03
15.5-17.0
0.6
0.75
0.75
1. Good quality
2. Competitive price
3. Professional
Tig Stainless Steel Welding Wire
series:ER304,ER308,ER308L,ER309,ER309L,ER316,ER316L,ER410,ER420,ER430etc.
Diameter:0.6-2.0mm
Type:1)MIG/MAG automatic welding wire(plastic spool tight-packing,20kg/spool,15kg/spool)
2)TIG Argon arc welding wire (packing in drums,1m/line,5kg/drum,10kg/drum)
/Stainless Steel TIG MIG Wire
Brand
(mm)
Diameter
Shielding Gas
Chemical Composition of Deposited Metal(%)
C
Si
Mn
P
S
Cr
Ni
Mo
Cu
ER308
0.6-4.0
Ar+0.5-2%CO2
0.08
0.3-0.65
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER308L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER308LSI
0.6-4.0
Ar+0.5-2%CO2
0.03
0.65-1.0
1.0-2.5
0.03
0.03
19.5-22.0
9.0-11.0
0.75
0.75
ER309
0.6-4.0
Ar+0.5-2%CO2
0.12
0.3-0.65
1.0-2.5
0.03
0.03
23.0-25.0
12.0-14.0
0.75
0.75
ER309L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
23.0-25.0
12.0-14.0
0.75
0.75
ER310
0.6-4.0
Ar+0.5-2%CO2
0.08-0.15
03-0.65
1.0-2.5
0.03
0.03
25.0-28.0
20.0-22.5
0.75
0.75
ER312
0.6-4.0
Ar+0.5-2%CO2
0.15
0.3-0.62
1.0-2.5
0.03
0.03
28.0-32.0
8.0-10.5
0.75
0.75
ER316
0.6-4.0
Ar+0.5-2%CO2
0.08
0.3-0.65
1.0-2.5
0.03
0.03
18.0-20.0
11.0-14.0
2.0-3.0
0.75
ER316L
0.6-4.0
Ar+0.5-2%CO2
0.03
0.3-0.65
1.0-2.5
0.03
0.03
18.0-20.0
11.0-14.0
2.0-3.0
0.75
ER316LSI
0.6-4.0
Ar+0.5-2%CO2
0.03
0.65-1.0
1.0-2.5
0.03
0.03
18.0-20.0
11.4-14.0
2.0-3.0
0.75
ER410
0.6-4.0
Ar+0.5-2%CO2
0.12
0.5
0.6
0.03
0.03
11.5-13.5
0.6
0.75
0.75
ER430
0.6-4.0
Ar+0.5-2%CO2
0.1
0.5
0.6
0.03
0.03
15.5-17.0
0.6
0.75
0.75
Tig Stainless Steel Welding rod
Type: stainless steel welding rod
Aws 5.9
Specification: ER308L, ER316L, ER309L,ER304,ER430,etc
Approval:ISO 9001:2000,CE
Our factory is Qinhuangdao Yanda-Guohai Stainless Steel Co.,Ltd. We specialize in producing stainless steel wire and welding materials for all kinds of uses.Our capacity is 600 tons per month.
The welding wire is mainly 300/400
series:ER304,ER308,ER308L,ER309,ER309L,ER316,ER316L,ER410,ER420,ER430etc.
Diameter:1.0-4.0mm
Type: TIG Argon arc welding wire (packing in length 1m/line,5kg/plastic case,10kg/plastic case)
Aws 5.9
Specification: ER308L, ER316L, ER309L,ER304,ER430,etc
Approval:ISO 9001:2000,CE
Our factory is Qinhuangdao Yanda-Guohai Stainless Steel Co.,Ltd. We specialize in producing stainless steel wire and welding materials for all kinds of uses.Our capacity is 600 tons per month.
The welding wire is mainly 300/400
series:ER304,ER308,ER308L,ER309,ER309L,ER316,ER316L,ER410,ER420,ER430etc.
Diameter:1.0-4.0mm
Type: TIG Argon arc welding wire (packing in length 1m/line,5kg/plastic case,10kg/plastic case)
Tig Welding Wire
Tig Welding Wire
1.Dia :0.8-1.6mm
2.packing:5Kg,15Kg
3.high quality and lower price
4.ISO9001:2000
TIG WELDING WIRE
Er308-16, Er308L-16, Er316-16, Er316L-16 Er309 -16 Er312-16, Er309L-16, Er312L-16, etc.
Er308-16, Er308L-16, Er316-16, Er316L-16 Er09 -16 Er312-16, E3r09L-16, Er312L-16, etc
Features:
1) Low hydrogen potassium, Cr0. 55-Mo0. 55 heat-resisting
steel welding rod
2) Power: DC transposition
3) For welding in all positions
4) The weldment should be preheated to 90-110 degrees Celsius
before welding
5) Used for welding heat-resisting steel of CrMo pearlite (such as
12CrMo ) under 510 degrees Celsius
6) Used for welding steel of high temperature and pressure
pipelines, chemical containers
1.Dia :0.8-1.6mm
2.packing:5Kg,15Kg
3.high quality and lower price
4.ISO9001:2000
TIG WELDING WIRE
Er308-16, Er308L-16, Er316-16, Er316L-16 Er309 -16 Er312-16, Er309L-16, Er312L-16, etc.
Er308-16, Er308L-16, Er316-16, Er316L-16 Er09 -16 Er312-16, E3r09L-16, Er312L-16, etc
Features:
1) Low hydrogen potassium, Cr0. 55-Mo0. 55 heat-resisting
steel welding rod
2) Power: DC transposition
3) For welding in all positions
4) The weldment should be preheated to 90-110 degrees Celsius
before welding
5) Used for welding heat-resisting steel of CrMo pearlite (such as
12CrMo ) under 510 degrees Celsius
6) Used for welding steel of high temperature and pressure
pipelines, chemical containers
Tig welding- ER70S-6
1.welding wire, Application building,ships,briges,ect
2.good weldability
3.low residue
4.low splash
5.high reliability
1.welding wire AWS A5.18 ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
2.Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
3.
Packaging
Wire Size
Spool Size
Net Weight
φ0.8~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties or Deposited Metal
Yield strengthσ
0.2
(Mpa)
Tensile strengthσ
b
(Mpa)
Elongationδ
5
(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil,rust,water etc from the work parts
4.0.9kg, 4.5kg, 5kg, 15kg, 20kg, 27kg plastic spool layer wind
5.15kg, 20kg iron spool layer wind
6.100kg, 250kg, 350kg drum packing
2.good weldability
3.low residue
4.low splash
5.high reliability
1.welding wire AWS A5.18 ER70S-6 is a kind of mild steel copper coated welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
2.Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
3.
Packaging
Wire Size
Spool Size
Net Weight
φ0.8~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties or Deposited Metal
Yield strengthσ
0.2
(Mpa)
Tensile strengthσ
b
(Mpa)
Elongationδ
5
(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Wire Size(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Welding position
Welding current(A)
40~140
50~220
80~350
120~550
Please be noted
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.
Before welding please clean out the oil,rust,water etc from the work parts
4.0.9kg, 4.5kg, 5kg, 15kg, 20kg, 27kg plastic spool layer wind
5.15kg, 20kg iron spool layer wind
6.100kg, 250kg, 350kg drum packing
Tig wire
TIG welding wire(copper coated)
1.Dia :0.8-1.6mm
2.packing:5Kg,15Kg
3.high quality and lower price
4.ISO9001:2000
TIG welding wire
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
1.Dia :0.8-1.6mm
2.packing:5Kg,15Kg
3.high quality and lower price
4.ISO9001:2000
TIG welding wire
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Application:
Used to weld ship building steel ( A , B , D , E , A36 , D36 , E36 ) and equivalent mild steel or 550 Mpa grade mild alloy steel , such as container building , construction machine , railway construction , pressure vessel for semi-auto or automatic gas shielded welding.
Conform with:
GB/T ER50-6 DIN SG2 JIS YGW12
AWS ER70S-6 BS A18 EN G3Si1
Wire Size
Spool Size
Net Weight
0.8mm
1.0mm
1.2mm
1.6mm
D100mm D200mm
D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg
chemical composition
of welding wire(%)
C
Mn
Si
P
S
Cr
Ni
Cu
0.06~0.15
1.40~1.85
0.80~1.15
≤0.025
≤0.035
-
-
≤0.50
Mechanical Properties
or
Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%)
AKV impact(J)
≥420
≥500
≥22
≥27(-29)
Tin Lead Solder Wire
We can supply 1 coresoldering tin wire ,3cores soldering tin wire ,5cores soldering tin wire.
We can supply the following items:
Resin Core Soldering Tin Wire, Exempt cleans soldering tin wires, Solid core soldering
tin wires, Soldering Bar, High pure anti-oxidant soldering tin bar, Sn-Cu series Lead-free solder, Sn-Ag-Cu series Lead-free solder, Sn-Sb series Lead-free solder, Sn-Cu-Ni series Lead-free solder, 250g one puts the soldering tin wire, 1LB one puts the soldering tin wire, 2LB one puts the soldering tin wire, Tin-plated to use positive pole wonderful and positive pole ball serial product, Produce BGA tin ball and use the soldering tin wires.
We can supply the following items:
Resin Core Soldering Tin Wire, Exempt cleans soldering tin wires, Solid core soldering
tin wires, Soldering Bar, High pure anti-oxidant soldering tin bar, Sn-Cu series Lead-free solder, Sn-Ag-Cu series Lead-free solder, Sn-Sb series Lead-free solder, Sn-Cu-Ni series Lead-free solder, 250g one puts the soldering tin wire, 1LB one puts the soldering tin wire, 2LB one puts the soldering tin wire, Tin-plated to use positive pole wonderful and positive pole ball serial product, Produce BGA tin ball and use the soldering tin wires.
Tin Lead Solder Wire
We can supply 1 coresoldering tin wire ,3cores soldering tin wire ,5cores soldering tin wire.
We can supply the following items:
Resin Core Soldering Tin Wire, Exempt cleans soldering tin wires, Solid core soldering
tin wires, Soldering Bar, High pure anti-oxidant soldering tin bar, Sn-Cu series Lead-free solder, Sn-Ag-Cu series Lead-free solder, Sn-Sb series Lead-free solder, Sn-Cu-Ni series Lead-free solder, 250g one puts the soldering tin wire, 1LB one puts the soldering tin wire, 2LB one puts the soldering tin wire, Tin-plated to use positive pole wonderful and positive pole ball serial product, Produce BGA tin ball and use the soldering tin wires.
soldering tin wiresn60pb40 ,solder wire sn60pb40,solder wire 60 40,solder wire sn63pb37,flattened wiresolder wire drawing machinepcb solder wirelead free solder wire rohssolder wire aws er70s 6resin core solder wire
We can supply the following items:
Resin Core Soldering Tin Wire, Exempt cleans soldering tin wires, Solid core soldering
tin wires, Soldering Bar, High pure anti-oxidant soldering tin bar, Sn-Cu series Lead-free solder, Sn-Ag-Cu series Lead-free solder, Sn-Sb series Lead-free solder, Sn-Cu-Ni series Lead-free solder, 250g one puts the soldering tin wire, 1LB one puts the soldering tin wire, 2LB one puts the soldering tin wire, Tin-plated to use positive pole wonderful and positive pole ball serial product, Produce BGA tin ball and use the soldering tin wires.
soldering tin wiresn60pb40 ,solder wire sn60pb40,solder wire 60 40,solder wire sn63pb37,flattened wiresolder wire drawing machinepcb solder wirelead free solder wire rohssolder wire aws er70s 6resin core solder wire
Tin Lead Solder Wire
Tin Lead Solder Wire
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin Lead Solder Wire
Solder Wires
To manufacture low residue/fine diameter wire solders, Qualitek utilizes state-of-the-art wire extrusion and wire drawing machines. Many of our formulations use the latest in no-clean/low residue technology found in our solder pastes and solder fluxes. We also developed our flux core manufacturing process to eliminate flux voids and irregular wire. Formulations available for: No-Clean, Water-Soluble, Rosin Mildly Activated, Super Activated Resin and Rosin Activated. Solid wire is also available. Qualitek wire solders meet or exceed ROHS.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
type of the Solder wire
Lead-free Solder Wire, Resin-cored Solder Wire, No-clean Solder Wire, Solder Wire for Capacitance, Water-solubulity Solder Wire, Aluminium Special Solder Wires
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin Lead Solder Wire
Solder Wires
To manufacture low residue/fine diameter wire solders, Qualitek utilizes state-of-the-art wire extrusion and wire drawing machines. Many of our formulations use the latest in no-clean/low residue technology found in our solder pastes and solder fluxes. We also developed our flux core manufacturing process to eliminate flux voids and irregular wire. Formulations available for: No-Clean, Water-Soluble, Rosin Mildly Activated, Super Activated Resin and Rosin Activated. Solid wire is also available. Qualitek wire solders meet or exceed ROHS.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
type of the Solder wire
Lead-free Solder Wire, Resin-cored Solder Wire, No-clean Solder Wire, Solder Wire for Capacitance, Water-solubulity Solder Wire, Aluminium Special Solder Wires
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
AWS ER70s-6/welding wire
AWS ER70S-6
(1) Dia: 0.8mm,1.0mm,1.2mm,1.6mm
(2) N.W.: 5kg ,15kg,20kg as Per Spool
(3) Applications: general welding
AWS ER70S-6 CO2 Welding Wire
(1)All welding wire are Precision Layer.
(2)Dia:0.8mm;1.0mm;1.2mm;1.6mm
(3)N.W.:5kg;12.5kg;15kg;20kg as Per Spool
(4)Packing of welding wires will be wind on strong spool,then sticker on the spool to indicate the size and weight,moisture paper wrap around then plastic tightly seal,then carton box,finally standard pallet.
(5)Excellent mechanical performance such as desposing speed and high deposing efficiency,stable arc,little splash,good welding seam.This series of welding wires are suitable for the low carbon steel and low alloy steel welded sructure,such as ship making,less vehicles,bridge,container,construction machinery,boilers and construction etc.
(1) Dia: 0.8mm,1.0mm,1.2mm,1.6mm
(2) N.W.: 5kg ,15kg,20kg as Per Spool
(3) Applications: general welding
AWS ER70S-6 CO2 Welding Wire
(1)All welding wire are Precision Layer.
(2)Dia:0.8mm;1.0mm;1.2mm;1.6mm
(3)N.W.:5kg;12.5kg;15kg;20kg as Per Spool
(4)Packing of welding wires will be wind on strong spool,then sticker on the spool to indicate the size and weight,moisture paper wrap around then plastic tightly seal,then carton box,finally standard pallet.
(5)Excellent mechanical performance such as desposing speed and high deposing efficiency,stable arc,little splash,good welding seam.This series of welding wires are suitable for the low carbon steel and low alloy steel welded sructure,such as ship making,less vehicles,bridge,container,construction machinery,boilers and construction etc.
Tin Lead solder wire(60/40), tin wire, tin lead soldering wire
tin lead soldering wire
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Features:
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Features:
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
Tin Lead solder wire(63/37) tin wire
tin lead soldering wire
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Features:
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Features:
1) Diameter: 0.5mm-4.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
Tin Lead soldering wire
tin solder wire and bar are based on tin, lead free alloy are compliant to ROHS regulation.
lead-free solder wires:
Spec
Melting
point
Tensile strength
Extensibility
Rate of spread
Usage
Sn100
232
20
43
70
Electroplating anode bar
Sn-Cu0.7
227
30
45
70
Lower cost, high melting point, poor wetting, low caplillarity, poor fatigue property, can be used for low requirements soldering.
Sn-Ag3.5
222
38
54
75
Higher cost,
SnAg3.0Cu0.5
217
40
58
78
Higer cost, good performance, first choice by most of factories.
SnAg0.3Cu0.5
SnAg3.5Cu0.7
Tin lead solder wire
Sn60Pb40, Sn63Pb37, Sn55Pb45, Sn50Pb50, Sn45Pb55, Sn40Pb60, Sn35Pb65, Sn30Pb70, Sn25P75
lead-free solder wires:
Spec
Melting
point
Tensile strength
Extensibility
Rate of spread
Usage
Sn100
232
20
43
70
Electroplating anode bar
Sn-Cu0.7
227
30
45
70
Lower cost, high melting point, poor wetting, low caplillarity, poor fatigue property, can be used for low requirements soldering.
Sn-Ag3.5
222
38
54
75
Higher cost,
SnAg3.0Cu0.5
217
40
58
78
Higer cost, good performance, first choice by most of factories.
SnAg0.3Cu0.5
SnAg3.5Cu0.7
Tin lead solder wire
Sn60Pb40, Sn63Pb37, Sn55Pb45, Sn50Pb50, Sn45Pb55, Sn40Pb60, Sn35Pb65, Sn30Pb70, Sn25P75
Tin Lead-free soldering wire
Tin Lead-free soldering wire,soldering wire. solder wire
Tin Lead-free soldering wire,soldering wire. solder wire
Lead-free low temperature soldering wire
Purpose: leadless soldering wire (tin solder wire)in high temperature for electronics industry
Physical properties:lead-free low temperature solder wire
(1) Liquid temperature: lower than 227
(2) Specific gravity: about 7.4
Alloy composition:(tin alloy)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
99.3
0.7±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Sn-Pb solder wire, Sn60Pb40, Sn63Pb37, Sn50Pb50 etc
Lead free solder wire, SnAgCu, SnCu, SnAg, SnSb.
Flux cored solder wire, no clean solder wire, water soluble solder wire.
Tin Lead-free soldering wire,soldering wire. solder wire
Lead-free low temperature soldering wire
Purpose: leadless soldering wire (tin solder wire)in high temperature for electronics industry
Physical properties:lead-free low temperature solder wire
(1) Liquid temperature: lower than 227
(2) Specific gravity: about 7.4
Alloy composition:(tin alloy)
Tin (Sn)
Cuprum (Cu)
Plumbum (Pb)
Stibium (Sb)
Bismuth (Bi)
Zincum (Zn)
Ferrum (Fe)
Aluminum (Al)
Arsenic (As)
Cadmium (Cd)
99.3
0.7±0.2
<0.1
<0.02
<0.01
<0.02
<0.02
<0.02
<0.03
<0.02
Physical properties
Spec.(colophony content) Melting point Specific gravity (g/cm2)
1.1% 227 7.38
2.2% 227 7.34
3.3% 227 7.40
Sn-Pb solder wire, Sn60Pb40, Sn63Pb37, Sn50Pb50 etc
Lead free solder wire, SnAgCu, SnCu, SnAg, SnSb.
Flux cored solder wire, no clean solder wire, water soluble solder wire.
Tin Solder Wire Lead (Sn20Pb80)
Tin Solder Wire Lead (Sn20Pb80)
1,High quality,less dross
2,.good humidity,bright beautiful,fast
3, package:customers' need
Tin Solder Wire Lead (Sn20Pb80)
solder wire (soldering material)
Accordance with the RMA grade of GB-T3131-2001.
Waving soldering wire:Good humidity, bright soldering point, beautiful, fast, no halogen, no ion pollution, high isolation resistance after cleaning, easily cleaning, environmental friendly
Item
Index
Item
Index
Soldering %
2.0-2.2
Cleaning after soldering
qualified
Halogen %
0
Isolation resistance after cleaning Ω
>1×10
Extension rate %
>86
PH
neutral
Acid KOHmg/g
<35
Bronze mirror erosion after cleaning
qualified
Cleaning methods
1: spraying brush, clean till no remains on PCB soldering side with deionisation liquid or distilled water (40-60).
2: ultrasonic cleaning, fast and good effect if cleaning PCB soldering side on surface of ultrasonic liquid (40-60).
*Alloy Compositions
Alloy compositions(%)
Sn
Cu
Pb
Sb
Bi
Ag
Zn
Fe
Al
As
Cd
63
0.002
max
The rest.
0.02
max.
0.02
max.
0.01
max
0.002
max.
0.002
max.
0.005
max.
0.03
max.
0.02
max.
1,High quality,less dross
2,.good humidity,bright beautiful,fast
3, package:customers' need
Tin Solder Wire Lead (Sn20Pb80)
solder wire (soldering material)
Accordance with the RMA grade of GB-T3131-2001.
Waving soldering wire:Good humidity, bright soldering point, beautiful, fast, no halogen, no ion pollution, high isolation resistance after cleaning, easily cleaning, environmental friendly
Item
Index
Item
Index
Soldering %
2.0-2.2
Cleaning after soldering
qualified
Halogen %
0
Isolation resistance after cleaning Ω
>1×10
Extension rate %
>86
PH
neutral
Acid KOHmg/g
<35
Bronze mirror erosion after cleaning
qualified
Cleaning methods
1: spraying brush, clean till no remains on PCB soldering side with deionisation liquid or distilled water (40-60).
2: ultrasonic cleaning, fast and good effect if cleaning PCB soldering side on surface of ultrasonic liquid (40-60).
*Alloy Compositions
Alloy compositions(%)
Sn
Cu
Pb
Sb
Bi
Ag
Zn
Fe
Al
As
Cd
63
0.002
max
The rest.
0.02
max.
0.02
max.
0.01
max
0.002
max.
0.002
max.
0.005
max.
0.03
max.
0.02
max.
Tin Solder Wire
Tin Solder Wire
1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc.
We are the prfessioanl manufactory load in Ningbo of China for the tin solder wire, 200mt/month; 40/60;63/37
Tin solder wire
1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc.
2) Residue is easy to remove by hot air after soldering work if necessary.
3) Available in many alloy composition, other alloy compositions are also available.
4) Smooth surface, good fluidness melt .
5) Good mechanical performance.
6) Good moisture, bright weld spot.
7) Very few scraps.
8) Forms: wire and bar
Brand No
Main Composition(%)
Impurities %(Max)
Sn
Pb
Sb
Sb
Cu
Bi
As
Fe
Zn
Al
Cd
S
Sn63Pb37
62~64
Rest
-
0.1
0.03
0.015
0.015
0.015
0.0015
0.002
0.001
0.01
Sn60Pb40
59~61
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn55Pb45
54-56
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn50Pb50
49-51
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn90Pb10
89-91
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn40Pb60
39-41
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn30Pb70(Sb1.5~2.0)
29-31
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc.
We are the prfessioanl manufactory load in Ningbo of China for the tin solder wire, 200mt/month; 40/60;63/37
Tin solder wire
1) It can applied in radio, communication, meters, instruments and copper, tin and irons and etc.
2) Residue is easy to remove by hot air after soldering work if necessary.
3) Available in many alloy composition, other alloy compositions are also available.
4) Smooth surface, good fluidness melt .
5) Good mechanical performance.
6) Good moisture, bright weld spot.
7) Very few scraps.
8) Forms: wire and bar
Brand No
Main Composition(%)
Impurities %(Max)
Sn
Pb
Sb
Sb
Cu
Bi
As
Fe
Zn
Al
Cd
S
Sn63Pb37
62~64
Rest
-
0.1
0.03
0.015
0.015
0.015
0.0015
0.002
0.001
0.01
Sn60Pb40
59~61
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn55Pb45
54-56
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn50Pb50
49-51
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn90Pb10
89-91
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn40Pb60
39-41
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Sn30Pb70(Sb1.5~2.0)
29-31
Rest
--
0.12 below
0.005
below
0.10
below
0.03
below
0.02
below
0.002
below
0.002
below
0.002
below
0.08
below
Tin Solder Wire
Tin Solder Wire
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin Solder Wire
Solder Wires
To manufacture low residue/fine diameter wire solders, Qualitek utilizes state-of-the-art wire extrusion and wire drawing machines. Many of our formulations use the latest in no-clean/low residue technology found in our solder pastes and solder fluxes. We also developed our flux core manufacturing process to eliminate flux voids and irregular wire. Formulations available for: No-Clean, Water-Soluble, Rosin Mildly Activated, Super Activated Resin and Rosin Activated. Solid wire is also available. Qualitek wire solders meet or exceed ROHS.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
type of the Solder wire
Lead-free Solder Wire, Resin-cored Solder Wire, No-clean Solder Wire, Solder Wire for Capacitance, Water-solubulity Solder Wire, Aluminium Special Solder Wires
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin Solder Wire
Solder Wires
To manufacture low residue/fine diameter wire solders, Qualitek utilizes state-of-the-art wire extrusion and wire drawing machines. Many of our formulations use the latest in no-clean/low residue technology found in our solder pastes and solder fluxes. We also developed our flux core manufacturing process to eliminate flux voids and irregular wire. Formulations available for: No-Clean, Water-Soluble, Rosin Mildly Activated, Super Activated Resin and Rosin Activated. Solid wire is also available. Qualitek wire solders meet or exceed ROHS.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
type of the Solder wire
Lead-free Solder Wire, Resin-cored Solder Wire, No-clean Solder Wire, Solder Wire for Capacitance, Water-solubulity Solder Wire, Aluminium Special Solder Wires
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
Tin Solder
Tin Solder
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin solder
Solder Bars
Kanghua solder bars are available in 1 lb, 2 lb and 5 lb forms. They can be purchased as cast or extruded bars. Custom sizes and lenghts can also be purchased such as 1/4" x 1/4". Various Pb Free and Tin-Lead alloys are available
Solder Wires
Kanghua offers many types of solid and core wire for electronic and industrial purposes. Wire diameters include .020, .031, .032, .050, .062, .063, .079, .125, .500 & more. Core types include rosin based (single core and 5-core), water soluable, cleaner, and no clean.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
Standard Wire Diameters
x
Diameter (inch)
0.125
0.092
0.062
0.050
0.040
0.031
0.025
0.020
Diameter (mm)
3.18
2.33
1.57
1.27
1.01
0.80
0.63
0.50
Standard Wire Gauge
11
13
16
18
19
21
23
25
High-value, low-cost pad finish ,Low consumption, uniform, flat coverage
Tin solder
Solder Bars
Kanghua solder bars are available in 1 lb, 2 lb and 5 lb forms. They can be purchased as cast or extruded bars. Custom sizes and lenghts can also be purchased such as 1/4" x 1/4". Various Pb Free and Tin-Lead alloys are available
Solder Wires
Kanghua offers many types of solid and core wire for electronic and industrial purposes. Wire diameters include .020, .031, .032, .050, .062, .063, .079, .125, .500 & more. Core types include rosin based (single core and 5-core), water soluable, cleaner, and no clean.
Sales and Engineering Support in every major electronics market
Continuity of supply ensured through multiple manufacturing sites
Solder scrap value recovery
High-value, low-cost pad finish
Low consumption, uniform, flat coverage
Alloys
Metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
Standard Wire Diameters
x
Diameter (inch)
0.125
0.092
0.062
0.050
0.040
0.031
0.025
0.020
Diameter (mm)
3.18
2.33
1.57
1.27
1.01
0.80
0.63
0.50
Standard Wire Gauge
11
13
16
18
19
21
23
25
Tin Wire
Solder Wire:
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,45/55,40/60,30/70, 20/80
3)weight: 50g-1000g
Tin Wire:
Made of low impurity electrolysis tin and super non-clean flux. This wire has high
precision, high reliability and low residue, while allowing use in various situations.
Inner packing:
100g/pc to 1,000g/pc
Our main products are over 20 sorts, including various solder wire, kinds of tin and lead alloy, tin sn/ lead pb with flux and without flux wires, extruded bar, lead-free solder, special type solder, flux, and other special solders, such as no-clean solder, water-solubility solder, aluminium special solder, and solder for capacitance in different diameters, starting from 0.5mm up to 5mm.
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,45/55,40/60,30/70, 20/80
3)weight: 50g-1000g
Tin Wire:
Made of low impurity electrolysis tin and super non-clean flux. This wire has high
precision, high reliability and low residue, while allowing use in various situations.
Inner packing:
100g/pc to 1,000g/pc
Our main products are over 20 sorts, including various solder wire, kinds of tin and lead alloy, tin sn/ lead pb with flux and without flux wires, extruded bar, lead-free solder, special type solder, flux, and other special solders, such as no-clean solder, water-solubility solder, aluminium special solder, and solder for capacitance in different diameters, starting from 0.5mm up to 5mm.
AWS ERTi-2 Pure Titanium welding wire In Straight
1. Standard: AWS A5.16/A5.16M
2. Materail: ERTi-1,ERTi-2,ERTi-3,ERTi-5
3. Dia:0.5~5mm
4. Professional Tech Support
LIHUA Titanium Welding Wire
1>Titanium welding Wire, Titanium welding Rod
Item name
Titanium welding wire, Titanium welding rod
Standard
AWS A5.16/A5.16M
Material
ERTi-1, ERTi-2, ERTi-3, ERTi-5, ERTi-7, ERTi-9
Diameter
.024~.24''(.6~6mm)
Length
36''(914.4mm)or Shearing Cutting to required length
Packaging
Plywood case at straight lengths or in coils or on spools or as per your requests
Payment
T/T in advance or Irrevocable L/C at sight
MOQ
10Kg
Delivery time
Within 5~15 days after deposit
2>Available Diameter and Type
Size (mm)
Dia 0.6
Dia 0.8
Dia 1.0
Dia 1.2
Dia 1.6
Dia 2.0
Dia 2.4
Dia 3.0
Dia 3.2
Dia 4.0
Dia 6.0
Size (inch)
0.024”
0.031"
0.039"
0.047"
0.062"
0.079"
0.093"
0.12"
0.125"
0.16"
0.24"
Straight
OK
OK
OK
OK
OK
OK
OK
OK
Spool
OK
OK
OK
OK
OK
OK
OK
Coil
OK
OK
OK
OK
OK
OK
OK
OK
3> Titanium Wires Dimension Tolerance
Diameter
0.1-0.3mm
0.3-0.8mm
0.8-2.0mm
2.0-6.0mm
Tolerance
+/- 0.025
+/-0.04
+/-0.05
+/-0.10
Length
200-500mm
500-1000mm
1000-2000mm
&2000mm
Tolerance
+/-1.0
+/-1.5
+/-2.0
+/-2.5
4> Chemical composition
AWS
Classification
CHEMICAL SPECIFICATIONS
AWS A5.16
UNS
No
ASTM B348
C
O
N
H
Fe
Al
V
ERTi 1
R50100
GR 1
0.03
0.03-0.10
0.012
0.005
0.08
ERTi 2
R50120
GR 2
0.03
0.08-0.16
0.015
0.008
0.12
ERTi 3
R50125
GR 3
0.03
0.13-0.20
0.02
0.008
0.16
ERTi 4
R50130
GR 4
0.03
0.18-0.32
0.025
0.008
0.25
ERTi 5
R56400
GR 5
0.03
0.12-0.20
0.030
0.015
0.22
5.5-6.7
3.5-4.5
ERTi 7
R52401
GR 7
0.03
0.08-0.16
0.015
0.008
0.12
ERTi 9
R56320
GR 9
0.03
0.08-0.16
0.020
0.008
0.25
ERTi 23
R56408
GR5-ELI
0.03
0.03-0.11
0.012
0.005
0.20
5.5-6.5
3.5-4.5
5> Standard Packages, Dimensions, and Weights
Package Form
Nominal Net Weight
lb
kg
Straight Lengths
5
2.5
10
5
25
10
50
25
Coil without Support
25
10
Coil with Support
50
25
Spools
in
mm
4
100
1
0.5
8
200
5
2.5
12
300
10~26
5~12
-
340
30
15
2. Materail: ERTi-1,ERTi-2,ERTi-3,ERTi-5
3. Dia:0.5~5mm
4. Professional Tech Support
LIHUA Titanium Welding Wire
1>Titanium welding Wire, Titanium welding Rod
Item name
Titanium welding wire, Titanium welding rod
Standard
AWS A5.16/A5.16M
Material
ERTi-1, ERTi-2, ERTi-3, ERTi-5, ERTi-7, ERTi-9
Diameter
.024~.24''(.6~6mm)
Length
36''(914.4mm)or Shearing Cutting to required length
Packaging
Plywood case at straight lengths or in coils or on spools or as per your requests
Payment
T/T in advance or Irrevocable L/C at sight
MOQ
10Kg
Delivery time
Within 5~15 days after deposit
2>Available Diameter and Type
Size (mm)
Dia 0.6
Dia 0.8
Dia 1.0
Dia 1.2
Dia 1.6
Dia 2.0
Dia 2.4
Dia 3.0
Dia 3.2
Dia 4.0
Dia 6.0
Size (inch)
0.024”
0.031"
0.039"
0.047"
0.062"
0.079"
0.093"
0.12"
0.125"
0.16"
0.24"
Straight
OK
OK
OK
OK
OK
OK
OK
OK
Spool
OK
OK
OK
OK
OK
OK
OK
Coil
OK
OK
OK
OK
OK
OK
OK
OK
3> Titanium Wires Dimension Tolerance
Diameter
0.1-0.3mm
0.3-0.8mm
0.8-2.0mm
2.0-6.0mm
Tolerance
+/- 0.025
+/-0.04
+/-0.05
+/-0.10
Length
200-500mm
500-1000mm
1000-2000mm
&2000mm
Tolerance
+/-1.0
+/-1.5
+/-2.0
+/-2.5
4> Chemical composition
AWS
Classification
CHEMICAL SPECIFICATIONS
AWS A5.16
UNS
No
ASTM B348
C
O
N
H
Fe
Al
V
ERTi 1
R50100
GR 1
0.03
0.03-0.10
0.012
0.005
0.08
ERTi 2
R50120
GR 2
0.03
0.08-0.16
0.015
0.008
0.12
ERTi 3
R50125
GR 3
0.03
0.13-0.20
0.02
0.008
0.16
ERTi 4
R50130
GR 4
0.03
0.18-0.32
0.025
0.008
0.25
ERTi 5
R56400
GR 5
0.03
0.12-0.20
0.030
0.015
0.22
5.5-6.7
3.5-4.5
ERTi 7
R52401
GR 7
0.03
0.08-0.16
0.015
0.008
0.12
ERTi 9
R56320
GR 9
0.03
0.08-0.16
0.020
0.008
0.25
ERTi 23
R56408
GR5-ELI
0.03
0.03-0.11
0.012
0.005
0.20
5.5-6.5
3.5-4.5
5> Standard Packages, Dimensions, and Weights
Package Form
Nominal Net Weight
lb
kg
Straight Lengths
5
2.5
10
5
25
10
50
25
Coil without Support
25
10
Coil with Support
50
25
Spools
in
mm
4
100
1
0.5
8
200
5
2.5
12
300
10~26
5~12
-
340
30
15
Tin alloy solder wire
Features:
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37, 60/40, 50/50, 45/55,40/60, 35/65, 30/70, 25/75,20/80
3)Weight:50-1000g
In order to meet the markets demands and solve the problems on aluminum alloy materials and enameled CCA wire welding of clients, in 1996, our company introduced advanced technology from foreign countries and took the lead in manufacturing tin wire special for aluminum alloy in China. This kind of tin wire is of good wettability, high welding speed, reliable welding spot, and no corrosion of slag, etc on aluminum and aluminum alloy materials. And then, our company continuously manufactured tin wire special for aluminum lamp base and enameled CCA wire and environment protective (leadfree) aluminum alloy tin wire, etc, which are widely used in field of lighting, electric motor, and transformer, etc
Made of low impurity electrolysis tin and super non-clean flux. This wire has high
precision, high reliability and low residue, while allowing use in various situations.
Inner packing:
100g/pc to 1,000g/pc
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37, 60/40, 50/50, 45/55,40/60, 35/65, 30/70, 25/75,20/80
3)Weight:50-1000g
In order to meet the markets demands and solve the problems on aluminum alloy materials and enameled CCA wire welding of clients, in 1996, our company introduced advanced technology from foreign countries and took the lead in manufacturing tin wire special for aluminum alloy in China. This kind of tin wire is of good wettability, high welding speed, reliable welding spot, and no corrosion of slag, etc on aluminum and aluminum alloy materials. And then, our company continuously manufactured tin wire special for aluminum lamp base and enameled CCA wire and environment protective (leadfree) aluminum alloy tin wire, etc, which are widely used in field of lighting, electric motor, and transformer, etc
Made of low impurity electrolysis tin and super non-clean flux. This wire has high
precision, high reliability and low residue, while allowing use in various situations.
Inner packing:
100g/pc to 1,000g/pc
Tin alloy solder wire
Features:
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
1) Diameter: 0.5mm-3.0mm
2) Sn/Pb: 63/37,60/40,55/45,50/50,40/60,30/70,20/80
3)Weight:50-1000g
Alloy
Content
Melting
Point()
Flux
Content
Diameter
Weight
/roll
Usage
Sn63Pb37
183
2.0±0.5
0.5-3.0mm
13-1000g
High-class electronics products and lighting industry.
Sn60Pb40
183-190
Sn55Pb45
183-203
2.0±0.5
0.5-3.0mm
13-1000g
Normal electrical,lighting or toy field.
Sn50Pb50
183-216
Sn45Pb55
183-227
2.0±0.5
0.5-3.0mm
13-1000g
Cannery,automotive industry,fuse wire,or any other soldering place with low requirements.
Sn40Pb60
183-238
Sn35Pb65
183-247
Sn30Pb70
183-255
Sn25Pb75
183-266
Sn20Pb80
183-280
Types of Solder Wires:
--Resin-cored Solder Wire
--Water-solubieity Solder Wire
--No-clean Solder Wire
--Stainless Steel Solder Wire
--Low temperature Solder Wire
--Aluminium Special Solder Wire
--Solid Solder Wire
Feature of Solder Wire:
--Fast melting,good wetting and expansibility.
--No break for the core,no splash and no odour.
--Good solderability and soldering joints with high brightness and strength.
--Good mechanical performance.
--Widely used in electronics,lighting,communication,radio,computer,instruments and other field.
--Residue is easy to remove by hot air after soldering work if necessary.
--Available in many alloy composition,other alloy composition are also available.
Tin and Lead wire
Solder Materials
Low lead impurity, Good fluidity, Low generation of solder dross, High mechanical streng
Solder Materials
It accords with RA Grade standard of GB/T3131-2001 Standard; it is widely used in capacitor manufacturing, directly realizing soft soldering connection on the galvanized coating and gold alloy coating on the head face of capacitor, and suitable for braze welding of metal base which is hard to weld, such as nickel plating part, galvanized part, Dumet wire, and copper, etc; and it is of high soldering speed, brightness, nice appearance, and reliable joint quality, etc.
Low lead impurity
Good fluidity
Low generation of solder dross
High mechanical strength
Low aggressive to solder pot material
Alloy
metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
Standard Wire Diameters
x
Diameter (inch)
0.125
0.092
0.062
0.050
0.040
0.031
0.025
0.020
Diameter (mm)
3.18
2.33
1.57
1.27
1.01
0.80
0.63
0.50
Standard Wire Gauge
11
13
16
18
19
21
23
25
Low lead impurity, Good fluidity, Low generation of solder dross, High mechanical streng
Solder Materials
It accords with RA Grade standard of GB/T3131-2001 Standard; it is widely used in capacitor manufacturing, directly realizing soft soldering connection on the galvanized coating and gold alloy coating on the head face of capacitor, and suitable for braze welding of metal base which is hard to weld, such as nickel plating part, galvanized part, Dumet wire, and copper, etc; and it is of high soldering speed, brightness, nice appearance, and reliable joint quality, etc.
Low lead impurity
Good fluidity
Low generation of solder dross
High mechanical strength
Low aggressive to solder pot material
Alloy
metaling range
Sn63/Pb37
183C
Sn60/Pb40
183-190C
Sn55/Pb45
183-203C
Sn50/Pb50
183-216C
Sn45/Pb55
183-227C
Sn40/Pb60
183-238C
Sn35/Pb65
183-247C
Sn30/Pb70
183-255C
Sn25/Pb75
183-266C
Sn20/Pb80
183-280C
Standard Wire Diameters
x
Diameter (inch)
0.125
0.092
0.062
0.050
0.040
0.031
0.025
0.020
Diameter (mm)
3.18
2.33
1.57
1.27
1.01
0.80
0.63
0.50
Standard Wire Gauge
11
13
16
18
19
21
23
25
Tin lead free solder wire Sn99.3Cu0.7
1)Good weldability in tin lead free solder wire
2)low residue,
3)high reliability,
4)RoSH.
Introduction of tin lead free solder wire
(1) RoSH, lead content lower than 100ppm.
(2) Smooth surface, good fluidness melt.
(3) Good mechanical performance.
(4) Bright weld spot.
Datasheet
Solder alloys
Components
Melting point °C
bar
wire
Sn
Ag
Cu
Sn99.3Cu0.7X
99.3
0.7
227
√
√
Sn99.0Ag0.3Cu0.7
99.0
0.3
0.7
227
√
√
Sn96.5Ag3.0Cu0.5
96.5
3.0
0.5
227
√
√
2)low residue,
3)high reliability,
4)RoSH.
Introduction of tin lead free solder wire
(1) RoSH, lead content lower than 100ppm.
(2) Smooth surface, good fluidness melt.
(3) Good mechanical performance.
(4) Bright weld spot.
Datasheet
Solder alloys
Components
Melting point °C
bar
wire
Sn
Ag
Cu
Sn99.3Cu0.7X
99.3
0.7
227
√
√
Sn99.0Ag0.3Cu0.7
99.0
0.3
0.7
227
√
√
Sn96.5Ag3.0Cu0.5
96.5
3.0
0.5
227
√
√
Tin lead solder wire Sn50Pb50
Tin lead solder wire Sn63Pb37 1:Eenvironment protection type,no pollute.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn50Pb50, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn50Pb50, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Tin lead solder wire Sn50Pb50
Tin lead solder wire Sn50Pb50 1:Eenvironment protection type,no pollute.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn50Pb50, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn50Pb50, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Thursday, March 31, 2011
Tin lead solder wire Sn60Pb40
Tin lead solder wire 60/40 1:Eenvironment protection type,no pollute.
2:Short wetting time,fine welt ability.
Tin lead solder wire 60/40, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
2:Short wetting time,fine welt ability.
Tin lead solder wire 60/40, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Tin lead solder wire Sn63Pb37
solder wire 63/37 1:Eenvironment protection type,no pollute.
2:Short wetting time,fine welt ability.
Sn63/Pb37 tin lead solder wire, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
2:Short wetting time,fine welt ability.
Sn63/Pb37 tin lead solder wire, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Tin lead solder wire Sn63Pb37
Tin lead solder wire Sn63Pb37 1:Eenvironment protection type,no pollute.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn63Pb37, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
2:Short wetting time,fine welt ability.
Tin lead solder wire Sn63Pb37, flux core wire, welding wire,
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Tin lead solder wire-Sn63/Pb37
Sn63/Pb37 solder wire, single core or three cores of specially-made rosin, ISO 9001
Sn63/Pb37 solder wire
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Sn63/Pb37 solder wire
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
AWS Er308 stainless steel welding wire in dustrial application
stainless steel welding wire AWS ER 308
available size:
MIG Wire : size: 0.8-1.6mm
TIG Wire: size: 1.6-5.0mm length; 1000mm
stainless steel welding wire AWS ER 308
1. 308 primarily used for welding of 18Cr-8Ni steels with good-looking welding seam, outstanding crack resistance and stable electric arc
2.Typical Chemical Analysis
C: 0.04% , Mn: 1.82%, Si: 0.34% , Ni: 9.5%, Cr: 20.13%
3. Mechanical performance: 0
Tensile strength MPa 607 , Charpy - V Akv % 41
4.Available size:
MIG Wire : size: 0.8-1.6mm
net weight: 5/10/15/20kg
Spool diameter: 100mm/200mm/300mm
TIG Wire: size: dia 1.6-5.0mm length; 1000mm
Net: 5kg/ 10kg
available size:
MIG Wire : size: 0.8-1.6mm
TIG Wire: size: 1.6-5.0mm length; 1000mm
stainless steel welding wire AWS ER 308
1. 308 primarily used for welding of 18Cr-8Ni steels with good-looking welding seam, outstanding crack resistance and stable electric arc
2.Typical Chemical Analysis
C: 0.04% , Mn: 1.82%, Si: 0.34% , Ni: 9.5%, Cr: 20.13%
3. Mechanical performance: 0
Tensile strength MPa 607 , Charpy - V Akv % 41
4.Available size:
MIG Wire : size: 0.8-1.6mm
net weight: 5/10/15/20kg
Spool diameter: 100mm/200mm/300mm
TIG Wire: size: dia 1.6-5.0mm length; 1000mm
Net: 5kg/ 10kg
Tin lead solder wire-Sn63/Pb37
Sn63/Pb37 solder wire, single core or three cores of specially-made rosin, excellent wettability, fluidity, reliable soldering
Sn63/Pb37 solder wire
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Sn63/Pb37 solder wire
specifications:
Model NO.: ZXAL200W
Melting point (Liquidus & Solidus):
183
o
C
Gravity:
8.40±0.04 g/cm
3
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Tin lead solder wire
solder wire, tin lead, sosingle core or three cores of specially-made rosin, excellent wettability, fluidity, reliable soldering
Sn55/Pb45 solder wire
specifications:
Model NO.: ZXAM202W
Melting point (Liquidus & Solidus):
183-203
o
C
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Sn55/Pb45 solder wire
specifications:
Model NO.: ZXAM202W
Melting point (Liquidus & Solidus):
183-203
o
C
Flux content: 2.0-3.0%
Diameter: Standard DIA:
0.3mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm, 1.2mm
Customized DIA: 0.3-5.0(mm)
Package:
10kg/carton
(Gross Weight)
Characteristics:
1. Excellent wettability, solderability and spreadability
2. Low impurity
3. Suitable for soldering highly integrated PCBs
4. Cost saving
5. Speeding production
Note: We also provide tin lead solder wires with other proportions of tin & lead, or with containment of Ag. Please see to our website for other products or E-mail us directly for more information.
Subscribe to:
Posts (Atom)