Wire er316L

ER316L is with 19% Cr-12% Ni-2% Mo austenite, corrosion resistance, heat resistance and crack resistance.
ER316L is stainless steel welding wire with MIG or TIGNwelding, the weld metal is with 19% Cr-12% Ni-2% Mo austenite, corrosion resistance, heat resistance and crack resistance. Mo for acetic acid, sulfurous acid, phosphoric acid and salts of corrosion resistance, especially is good at against chloride pitting
Uses: mainly for the chemical industry, power engineering structures in stainless steel welding, such as AISI316L, SUS316L. Also available on the required heat treatment after welding high chromium steel and dissimilar steel
Chemical composition of wire (%)
C
Mn
Si
S
P
Cr
Ni
Mo
Cu
Ti
0.024
2.05
0.48
0.010
0.018
18.65
11.83
0.10
0.09

Tensile strength Rm(MPa)
570
Elongation A(%)
34