Friday, January 28, 2011

flux cored wire

1. flux cored wire,normally used for shipbuilding, marine structures, steel structures, bridges, chemical welding.wire
1, flux cored wire, low-alloy steel and high strength steel 490Mpa level, normally used for shipbuilding, marine structures, steel structures, bridges, chemical welding equipment, etc.
2,
Packaging
Wire Size
Spool Size
Net Weight
Φ1.0~1.6(mm)
D100mm D200mm D270mm D300mm K300mm
1kg,5kg,15kg,18kg,20kg

chemical composition of welding wire(%)
C
Mn
Si
P
S
≤0.10
≤1.75
≤0.75
≤0.03
≤0.03
Mechanical Properties or Deposited Metal
Yield strengthσ0.2(Mpa)
Tensile strengthσb(Mpa)
Elongationδ5(%
AKV impact(J)
≥400
≥480
≥22
≥47(0°C)

Wire Size(mm)
φ1.2
φ1.4
φ1.6
Welding position

Welding current(A)
120~300
160~400
190~450
Please be noted:
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.Before welding please clean out the oil,rust,water etc from the work parts
3.The protection of the use of CO2 gas, CO2 gas purity of 99.98%.
4.CO2 welding to protect the flow of gas should be controlled in 20-25L/min.
5.Extend the length of the wire should be controlled in the range of 15-25mm.
6.Preheating before welding to 150-300 °C, PWHT 700-740 °C tempered by the need to deal with.

No comments:

Post a Comment