LST-SKD61 sealing bar

1,does not soften in high temperatures
2,with good heat resistance, wear resistance, cracking resistance.

LST-SKD61
MAG-wire electrode/TIG welding rod
Standard identification
1.2567
DIN EN 14700 S Fe 3
Area of application/characteristics
For repairs of hot forming tools as well as for reinforcement of work surfaces of hot work surfaces; to be used, e.g. with anneal cuts, casting mold that does not soften in high temperatures, forging dies etc
Chemical composition(standard values/wire analysis in)
C
Si
Mn
Cr
V
W
0.30
0.25
0.40
2.50
0.60
4.50
The chemical composition of the pure weld deposit depends on the weld parameters applied
range of hardness:approximately 41-46 HRC
Deposited hardness of the material strongly depends on the parent material and its chemical composition. However, this influence will be decreased as welded layers increases.

Shielding gas

Shielding gas
MAG
M21
TIG
1/ pure argon
Dimensions(mm)
MAG






LASERWELDING
0.10
0.20
0.30
0.40
0.40
0.50