Friday, May 13, 2011

PVC welding machine automatical style

> PVC welding machine auto
>adjustable welding temperature
>adjustable speed
>adjustable air volume rate
>factory price,CE
Automatic hot air flex PVC banner welding machine
(
Model 4000I style banner welder)
Application on our automatic banner welder:

laminate and bond up disjunct flat painting surface made of heat-melted material, such as outdoor advertising poster, PVC cloth & PE fabric Canvas, outdoor poster banner, plastic surface, Sailcloth...etc.

The wind power can adjust, if you weld thick flex, choose high wind power; if you weld thin flex, then choose low wind power.
It can turn off automatic when no people operate. If no work in 15minutes, it will turn off the heater at first, and after more 3 minutes, it will turn off the power automatic.

Product Description:
Good companion for painting machine - Poster Heat Jointer Machine may join disjunct advertising poster surface without mucilage.
Know to all, the way to bond disjunct advertising poster surfaces, we usually use mucilage, such as the 502 glue to join them together in one, but the means have a lot of disadvantages, such as:
Almost all of these kinds of bond are harmful on human health;
When work, the operation is slow and is not too satisfied in strength with the glue, to get a good strength, usually we must proceed a special handling, such as whet the surface to make the surface not smoothed, so it may cost more workers;
The air temperature may influence the stick strength, in low temperature environment, the bond effect maybe bad. The Heat-Jointer Machine Without Mucilage, will be a more efficient companion for advertising material instead of the 502 glue.
It can nicely solve the above existent problems, and may save more manpower and work field, for example, a PVC jointed painting with 200 meters long surface can be easily coalesced together and well matched, all the works can be well finished by a single person on only a heat-resistant and smooth base ground about 30 square meters.

The machine is designed self-moveable, the volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable;

The HEAT JOINTER Machine, to join disjunct poster banner without mucilage which is constructed simple, easy to maintain, The volume is small, the whole weight only 9 kilogram, the work temperature and self-move speed is adjustable; the operation is also simple, and
needs not much guide to operate.

When use:
Immobilise both ends of each disjunct poster surface with something such as stick belt or clamp, and leave about 30-40mm wide overlap edge on each disjunct poster surface edge;
Turn on the machine, prepare warm up about 2 minutes;
Bring up the machine, and place the roll at the end of the overlap edge;
According to quality and thickness of the poster surface material, consider the ground circumstance, adjust the proper temperature and speed, handle the Fuse machine Gun down and insert it between the two poster banner edges, then the machine start running, after go pass the overlap edge, the two disjunct banners will be well joined in one.
Detailed Operation Instruction:
Pic 1:
Pic 2:
Pic 3:
Technology Data:
MODEL No.
MODEL 4000I WELDING
MODEL 4000L WELDING
VOLTAGE/FREQUENCY
220V+/-10%,50HZ & 110V+/-10%,40-60HZ Optional
220V+/-10%,50HZ
POWER CONSUMPTION
0.80KW-1.00KW
1.50KW-2.00KW
ADJUSTABLE TEMPERATURE
0-560 degree centigrade
0-650 degree centigrade
ADJUSTABLE SPEED RANGE(m/min)
0-10.0 meters/minute
0-12.0 meters/minute
ADJUSTABLE BOLWING RATE OF HEATED AIR
40-100%
Screen Display: “F0-30”
40-100%
Screen Display: “F0-30”
TIME OF POWER-OFF AUTO
No operation in 15 minutes
No operation in 15 minutes
NET/GROSS WEIGHT (KG
)

9.0/10.0KG
9.5/10.0KG
WELDING OVERLAP WIDTH
10-50mm
10-50mm
WELDING MATERIAL THICKNESS
0.5-3mm
0.5-5mm
PACKAGE DIMENSIONS
(cm)
L48cm*W32cm*H32cm
L48cm*W32cm*H32cm

No comments:

Post a Comment