straight CO2 gas shilded welding wire drawing machine

CO2 gas shilded welding wire drawing machine,different quality for different usageWe can promise our quality of the wleding wire
ER70s-6
CO2 gas shilded welding wire
MIG welding wire
MAG welding wire
TIG welding wire
diameter specification0,8mm; 1.0mm; 1.2mm;1.6mm and so on
we also have flux cored welding wire used in making ship.
The complete set of equipment such as steel wire drawer for CO
2
gas coverage welding wire, steel wire chemically plating (copper) bath, and welding wire layer wrapping machine, etc.

Technical Parameters
(
1
) Wire surface pretreatment line equipment
1. Equipment comprising and technical requirement
Duck billed pay-off machine, with 2.5T wire coil loading, with wire confusion EMG stop.
When the machine is used, the wire coil is bent on the two directions vertical each other at least so as to peel the oxidation rust on wire surface. The material used for this machine is YG8 horniness alloy, and the hardness is over HRC60. Using life is about 6 months.
Steel wire ball strong force cleaning up machine, the guide die is laid at front of machine, the steel wire cleaning up ball is used to wipe the wire surface, and the pressure cooling water washes the scale and impurity on wire surface. The air blowing unit is arranged at exit to reduce the water brought out by steel wire.
Electroanalysis pickling machine, the electroanalysis pickling technique is adopted to clean up the residual oxidation skin and rust on wire surface. Via water washing and dry blowing to ensure the wire surface cleaning up before enter the boron coating technique. PP plate (thickness 15mm ), channel body length 6.8 meters. Up and down channel structure. The positive and negative plates are insolated each other, which are arranged on up channel (leading thickness 10mm ). The rectified console is 0~ 500A and 0~12V. Equipped with acid liquid cycle pump.
Heating water channel unit, steam or electric heating is used, with auto temp. control unit, with cyclic pump. The channel body length is 1.5 meter, enclosed 40mm thickness heat preservation cotton surrounding.
Boron coating unit,steam or electric heating is adopted with auto temp. controller. There is air blowing nozzle. The channel body length is over 4.5 meters, with cyclic pump.
Drying unit, straight tube drying is adopted with over 6 meters length. There is auto temp. controller with max. temp. 150°C . The 40mm thickness heat preservation layer is enclosed at outside wall of tube.