Stainless steel welidng wire ER316L is low carbon, the weld metal is with 19% Cr-12% Ni-2% Mo austenite, corrosion resistance.
Stainless steel welding wire
ER316L is low carbon stainless steel with MIG welding, the weld metal is with 19% Cr-12% Ni-2% Mo austenite, corrosion resistance, heat resistance and crack resistance. Mo for acetic acid, sulfurous acid, phosphoric acid and salts of corrosion resistance, especially is good at against chloride pitting
Uses: mainly for the chemical industry, power engineering structures in stainless steel welding, such as AISI316L, SUS316L. Also available on the required heat treatment after welding high chromium steel and dissimilar steel
Chemical composition of wire (%)
C
Mn
Si
S
P
Cr
Ni
Mo
Cu
Ti
0.024
2.05
0.48
0.010
0.018
18.65
11.83
0.10
0.09
Tensile strength Rm(MPa)
570
Elongation A(%)
34
No comments:
Post a Comment