CO2 Gas Shielded Welding Wire is a low alloy steel gas shielded welding wire, protected with pure CO2 or Ar+CO2 gas.
CO2 GAS-SHIELDED WELDING WIRE
ER50-6
ACCORD WITH:GB/T811O:ER5O-6
CORRESPONDING TO:AWS A5.18 ER7S-6DIN SG2/BS A18/JIS YGW12/EN440
DESCRIPTION:
ER50-6 is a low alloy steel gas shielded welding wire,protected with pure CO2or Ar + CO2 gas.During welding,stable arc,low spatters,excellentfabrication weldahility and low sensitivity of weld gas porosity can be obtained.It can be used for all position welding with large welding current range.
APPLICATIONS:
Suitabte for welding carbon steel and 50OMPa grade low alloy steel, such as vehicles, bridges,construction,mechanical structures etc.Also can be used in welding thin plates and pipelines with high speed.
Typical Chemical Composition of Wire (%)
C
Mn
Si
S
P
Cu
Others
0.08
1.15
0.92
0.016
0.020
0.20
≤0.50
Typical Mechanical Properties of Weld Metal
Tensile Strength
Yield Point
Elongation
Impact V-Notch
Shielding gas
(MPa)
(MPa)
(%)
(J)
540
420
29
-29
90
100%CO2
550
435
30
-40
70
80%Ar+20%CO2
ER49-1
ACCORD WITH:GB ER49-1(H08Mn2SiA)
CORRESPONDING TO:DIN SG3
DESCRIPTION:
ER49-1 is a carbon steel and low alloy steel gas shield welding wire .It is able to prevent gas porosity and slag inclusion producing due to the deoxidization depending on Mn and Si in the wire jointly.The crack resistance of weld metal can be developed and satisfactory mechanical properties can be obtained.
APPLICATIONS:
Suitable for welding carbon steel and 500MPa grade low alloy steel,such as vehicles,bridges,
construction and mechanical structures etc.
Typical Chemical Composition of Wire (%)
C
Mn
Si
S
P
Cu
Others
0.08
1.97
0.72
0.019
0.02
0.2
≤0.50
Typical Chemical Composition of Wire (%)
Tensile Strength
Yield Point
Elongation
Impact V-Notch
Shielding gas
(MPa)
(MPa)
(%)
(J)room
545
425
30
30
CO2
Specification&Recommended Current Range (DC+)
Diameter(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Current(A)
40-140
50-220
80-350
170-550
ER50-3
ACCORD WITH:GB/T ER50-3
CORRESPONDING TO:AWS ER70S-3/JIS YGW16
DESCRIPTION:
ER50-3 is a low alloy steel wire protected with pure CO2 or Ar+CO2 gas,It shows a perfect performance in welding. The arc is stable and spatter is small. It has a good performance in crack resistance. Suitable for high speed welding on thin plates with low current.
APPLICATIONS:
Suitable for welding 450/500MPa grade carbon steel and low alloy steel,such as structure of bridges,vehicles,construction,pipes etc.
Typical Chemical Composition of Wire (%)
C
Mn
Si
S
P
Cu
Others
0.09
1.2
0.66
0.02
0.016
0.2
≤0.50
Typical Mechanical Properties of Weld Metal
Tensile Strength
Yield Point
Elongation
Impact V-Notch
Shielding gas
(MPa)
(MPa)
(%)
(J)room
545
425
30
30
CO2
Specification & Recommended Current Range (DC+)
Diameter(mm)
φ0.8
φ1.0
φ1.2
φ1.6
Current(A)
60-150
70-230
100-350
120-450
ER70S-G
CORRFSPONDING TO:AWS ER70S-G/JIS YGW1
DESCRIPTION:
ER70S-G is a low alloy steel gas shielded welding wire, protected with pure CO2 or Ar + CO2 gas During welding, stable arc,low spatters,excellentfabrication weldability and low sensitivity of weld gas porosity can be obtained.It can be used for all position welding with large welding current by adding proper quantity of Ti element.
APPLICATIONS:
Suitable for welding carbon steel and 50OMPa grade low alloy steel,such as vehicles.bndges. construction,mechanical structures etc,Also can be used in welding thin plates and pipelines with high speed.
Typical Chemical Composition of Wire (%)
C
Mn
Si
S
P
Cu
Ti
0.08
1.15
0.92
0.016
0.02
0.2
0.13
Typical Mechanical Properties of Weld Metal
Tensile Strength
Yield Point
Elongation
Impact V-Notch
Shielding gas
(MPa)
(MPa)
(%)
(J)
540
420
29
-29
90
100%CO
550
435
30
-40
70
80%Ar+20%CO
No comments:
Post a Comment